





Ask a Question About This Product
- Stock: In Stock
- Model: VWS1433
- SKU: VWS1433
The VWS1433 is a three-tier wall-mounted storage shelf designed for commercial kitchens where floor space is restricted. It measures 1400×300×1100 mm and holds plates, cookware, dry goods, and small equipment at working height. Typical installations include prep areas, service stations, and dry storage zones in hotels, restaurants, and catering facilities.
Commercial Application
Wall-mounted shelving recovers vertical space in high-traffic kitchens where mobile racks or floor cabinets create bottlenecks. The open-shelf design keeps frequently used items visible and accessible without opening doors. This configuration reduces time wasted searching for tools or ingredients during service.
Height-adjustable brackets allow operators to configure spacing for variable loads: taller items on bottom tiers, smaller containers above. The unit sits above preparation tables or adjacent to cooking lines. Total capacity depends on bracket spacing and load distribution across all three levels.
Key Operational Advantages
- Three shelves span 1400 mm width, each 300 mm deep
- Height-adjustable brackets accommodate loads from 150 mm cookware to 400 mm containers
- Wall mounting clears floor space and simplifies cleaning beneath unit
- SS201 stainless steel resists corrosion in humid commercial environments
- Open shelving provides line-of-sight inventory management
- 14 kg total weight permits installation on standard kitchen walls with appropriate fixings
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | VWS1433 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 14.0 kg (30.9 lbs) |
Construction & Build Quality
Shelves are pressed from 0.8 mm SS201 stainless steel with rolled edges for rigidity. Support brackets use 1.0 mm SS201 with beveled geometry to transfer load directly to wall fixings. All welds are ground flush to prevent debris accumulation.
- SS201 grade stainless steel throughout — corrosion-resistant in wet environments
- 0.8 mm shelf thickness with edge rolling provides stiffness without excessive weight
- 1.0 mm bracket material distributes point loads across fixing zones
- Ground welds and smooth surfaces comply with commercial hygiene codes
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the VWS1433 direct from Turkish commercial equipment manufacturers to buyers in the UK, Europe, USA, Canada, Middle East, and Africa. Shipment includes wall-mounting hardware and height-adjustment brackets. Bulk orders ship via freight forwarder; individual units ship via express carrier.
Frequently Asked Questions
Q: What grade of stainless steel is used in the VWS1433?
A: Shelves and brackets are SS201 stainless steel. This grade provides corrosion resistance in commercial kitchens at lower cost than 304-grade. It meets CE hygiene standards for food-contact surfaces.
Q: What is the load capacity per shelf?
A: Rated capacity depends on bracket spacing and wall fixing method. Typical installations support 25–35 kg per shelf when brackets are spaced at 700 mm centers and fixed into masonry or structural studs. Consult installation drawings for specific load ratings.
Q: Can shelf height be adjusted after installation?
A: Brackets include vertical adjustment slots allowing 50 mm repositioning without removing wall fixings. Full reconfiguration requires loosening bracket bolts and relocating to new fixing points.
Q: Is a splashback available for this model?
A: The VWS1433 is supplied without integral splashback. A separate stainless steel splashback panel can be fabricated to site dimensions if required for wet prep areas or hygiene zone compliance.
Q: Can dimensions be customized for non-standard wall widths?
A: Custom widths, depths, and tier counts are available on request with minimum order quantities. Lead time for bespoke sizing is 6–8 weeks from order confirmation.