





Ask a Question About This Product
- Stock: In Stock
- Model: VWS1533
- SKU: VWS1533
The VWS1533 is a three-tier wall-mounted storage shelf measuring 1500×300×1100mm, built from stainless steel for commercial kitchen and food preparation environments. Height-adjustable configuration allows operators to position shelves according to storage needs for plates, utensils, ingredients, and equipment. Unit weighs 14 kg and mounts directly to wall surfaces, preserving floor space in high-traffic preparation zones.
Commercial Application
Wall-mounted shelving removes storage from floor level, improving movement flow during service preparation. Open-tier design provides immediate visual access to stocked items without door operation. Operators retrieve plates, garnish containers, or plated ingredients without interrupting workflow in confined galley or prep line layouts.
Three adjustable shelves accommodate varied item heights across shifts. Positioning near plating stations or grill lines reduces reach distance during high-volume service. 1500mm width supports multiple ingredient containers or stacked plateware within arm's reach of cooks working hot or cold prep.
Key Operational Advantages
- Three height-adjustable shelves across 1500mm width accommodate varied container sizes
- 300mm depth provides storage without excessive protrusion into work corridors
- Wall-mounted design eliminates floor footprint in tight galley or prep line spaces
- Stainless steel construction meets food-contact hygiene standards for CE, NSF, and CSA compliance
- 14 kg unit weight allows single-person installation on reinforced commercial wall surfaces
- Angled support brackets distribute load across wall mounting points for heavy utensil or plateware storage
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | VWS1533 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 14.0 kg (30.9 lbs) |
Construction & Build Quality
Shelves fabricated from SS201 stainless steel at 0.8mm thickness. Support brackets use 1.0mm SS201 with angled bracing to transfer load to wall-mount points. All surfaces finished with Scotch Brite for non-porous cleanability required in food-contact zones.
- SS201 stainless steel shelves at 0.8mm gauge for food-safe surface contact
- Support brackets at 1.0mm gauge with angled load distribution geometry
- Scotch Brite finish allows wet-wipe cleaning between service periods
- Wall-mount hardware rated for commercial kitchen vibration and humidity exposure
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the VWS1533 from UK-based stock with freight service to Europe, North America, Middle East, and Africa. Unit ships as flat-pack assembly with mounting hardware and installation template. Delivery lead times vary by destination; freight quotations provided for multi-unit orders or remote locations.
Frequently Asked Questions
Q: What stainless steel grade is used in the VWS1533 construction?
A: Shelves and support brackets use SS201 stainless steel, a chromium-manganese alloy suitable for food-contact surfaces in commercial kitchens. SS201 provides corrosion resistance in humid environments at lower cost than 304 grade. Surface finish is Scotch Brite for cleanability.
Q: What is the load-bearing capacity per shelf?
A: Each 1500×300mm shelf supports distributed loads typical of stacked plateware, utensil containers, or ingredient bins when properly wall-mounted to reinforced surfaces. Angled support brackets transfer weight to wall anchors. Load capacity depends on wall material and anchor specification; consult installation guide for substrate requirements.
Q: How is shelf height adjusted on the VWS1533 unit?
A: Shelves mount to vertical support rails with adjustable bracket slots, allowing repositioning in incremental steps. Operators loosen mounting hardware, reposition shelf to desired height, and retighten. Adjustment accommodates changing storage needs across service periods or menu shifts.
Q: Does the VWS1533 include splash-back panels?
A: Unit ships as open-tier shelving without rear splash guards. Wall-mounted design assumes installation against existing tiled or stainless surfaces that meet hygiene standards. Splash-back panels can be specified as custom addition for exposed-wall installations.
Q: Can shelf dimensions be customized for non-standard wall widths?
A: TurcoBazaar offers custom sizing for wall shelf units to fit specific prep line or galley dimensions. Custom orders require wall width, desired depth, and vertical clearance measurements. Lead times extend for fabricated sizes; contact for quotation and production schedule.