







Ask a Question About This Product
- Stock: In Stock
- Model: THWBS1R163
- SKU: THWBS1R163
A single-level wall-mounted shelf measuring 1600mm wide by 300mm deep, constructed from 304 AISI stainless steel for food-contact environments. Height adjustable mounting system allows positioning between different wall stud intervals. Weighs 7 kg; supplied with rails and mounting consoles for professional installation.
Commercial Application
Wall shelving removes items from floor level and keeps prep ingredients, plated components, or cleaned equipment within arm's reach during service. Adjustable mounting height accommodates varying bench clearances or equipment footprints below. The 300mm depth fits standard wall stud spacing in most commercial kitchens without obstructing walkways.
Used above prep benches, dishwashing stations, or holding areas during busy shifts. The 1600mm span covers two standard workstations or one extended plating line. Scotch Brite finish resists visible scratching under repeated cleaning cycles.
Key Operational Advantages
- 304 AISI stainless steel resists corrosion from acidic foods and cleaning chemicals
- Height adjustable brackets fit wall stud intervals from 400mm to 600mm centres
- 300mm depth provides accessible storage without encroaching on narrow prep aisles
- Scotch Brite finish hides minor surface wear during high-volume service
- Supplied disassembled with all rails and consoles; 7 kg total weight simplifies two-person installation
- CE certified for UK/EU compliance; meets NSF and CSA hygiene standards for North American installations
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | THWBS1R163 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 7.0 kg (15.4 lbs) |
Construction & Build Quality
Fabricated from 304 AISI stainless steel sheet with welded corners and Scotch Brite surface finish. Mounting consoles are steel with zinc plating; height adjustment slots accommodate 50mm increments. All food-contact surfaces are non-porous and cleanable to commercial hygiene codes.
- 304 AISI stainless steel sheet construction throughout shelf deck
- Scotch Brite finish applied to all visible surfaces
- Welded corner joints eliminate crevices where food debris collects
- Galvanised steel mounting brackets with slotted height adjustment
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies this unit from UK stock for next-day delivery within mainland Britain. International shipping available to Europe, USA, Canada, Middle East, and Africa with freight quotation provided on request. Volume orders for multi-site fitouts are coordinated through dedicated commercial accounts.
Frequently Asked Questions
Q: Is this shelf manufactured from 304 or 430 grade stainless steel?
A: 304 AISI stainless steel throughout the shelf deck and structural components. This grade provides superior corrosion resistance in commercial kitchens exposed to acidic foods and chlorinated cleaning agents.
Q: What is the maximum load capacity per shelf level?
A: Rated for 40 kg evenly distributed load when mounted to solid masonry or steel stud walls at 400mm centres. Load capacity reduces to 30 kg on plasterboard substrates with appropriate cavity fixings.
Q: How much vertical adjustment is available in the mounting brackets?
A: Slotted consoles provide 150mm total adjustment range in 50mm increments. This accommodates installation above benches of varying heights or equipment with different clearance requirements.
Q: Can a splash-back panel be fitted to the rear edge of the shelf?
A: No integral splash-back is included with this model. A separate wall-mounted splash-back panel can be installed behind the shelf if required by local health codes or to protect painted wall surfaces.
Q: Are custom widths available for non-standard wall spans?
A: Standard production lengths are 1000mm, 1200mm, 1400mm, 1600mm, 1800mm, and 2000mm. Custom widths between 600mm and 2400mm can be fabricated with 8-week lead time and minimum order quantity of three units.