







Ask a Question About This Product
- Stock: In Stock
- Model: THWBS1R164
- SKU: THWBS1R164
This single-level wall shelf mounts above work surfaces in commercial kitchens to store plated components, ingredients, or cleaned smallware during service. The 1600x400mm deck provides 0.64 m² of storage surface. Height adjustment allows positioning between prep benches and overhead extraction.
Commercial Application
Kitchen managers install wall shelves to reclaim bench space occupied by ingredient containers and plated garnishes. Mounting above prep stations keeps oils, seasonings, and garnish trays within arm's reach without consuming valuable work surface. The 400mm depth suits standard gastronorm pans and ingredient bowls.
Chefs use the shelf during plating and assembly work to hold prepared components before service. The stainless steel deck tolerates splashes from wet prep work and cleans down with standard commercial detergents. The 1600mm length spans typical two-bay prep bench configurations.
Key Operational Advantages
- 304 AISI stainless steel construction with Scotch Brite finish resists corrosion in wet environments
- Height adjustable mounting consoles position shelf between 350mm and higher clearances depending on wall fixings
- 1600x400mm deck supports multiple gastronorm pans or ingredient containers within single operator reach zone
- 7 kg unit weight allows two-person installation without lifting equipment
- Rails and console brackets included in package for immediate mounting
- CE certified for UK and EU commercial kitchen hygiene standards
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | THWBS1R164 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 7.0 kg (15.4 lbs) |
Construction & Build Quality
The shelf deck uses 304 AISI grade stainless steel with Scotch Brite directional grain finish. All mounting consoles and rails ship as part of the assembly package. Wall fixings are not included and must be selected based on substrate type—brick, tile, or stud partition.
- 304 AISI stainless steel deck and brackets resist chloride corrosion from cleaning agents
- Scotch Brite finish hides minor scratches and maintains uniform appearance under commercial use
- Adjustable console slots allow height positioning during installation
- Disassembled flat-pack reduces shipping volume and protects finish during transit
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies this wall shelf from UK stock to commercial buyers in Europe, North America, Middle East, and Africa. Freight for single units ships via standard parcel carrier. Multi-unit orders for hotel refits or chain rollouts qualify for consolidated pallet shipping with volume pricing.
Frequently Asked Questions
Q: What grade of stainless steel is used in the shelf deck?
A: The deck is manufactured from 304 AISI stainless steel. This grade provides corrosion resistance in commercial kitchens with chloride-based cleaning agents and wet environments.
Q: What is the load-bearing capacity of the 1600mm shelf?
A: Load capacity depends on wall substrate and fixing type. Typical installation into masonry with chemical anchors supports 40-50 kg distributed load. Consult a structural advisor for plasterboard or hollow partition installations.
Q: Can the shelf height be adjusted after installation?
A: The console brackets allow height adjustment during initial installation. Once wall fixings are secured, height changes require removing fixings and repositioning brackets.
Q: Are splash-back panels available for this model?
A: This model is supplied as open shelf only. Splash-back panels are not included. Many buyers mount shelves below existing tiled walls or stainless cladding for splash protection.
Q: Can TurcoBazaar supply custom widths or depths?
A: Custom dimensions are available on request for orders above ten units. Lead time for custom fabrication is typically 6-8 weeks. Contact with required dimensions for quotation.