







Ask a Question About This Product
- Stock: In Stock
- Model: THWBS1R184
- SKU: THWBS1R184
Single-level wall-mounted shelf designed for storage in commercial kitchens, prep areas, and food service operations. Dimensions are 1800mm wide by 400mm deep, with height adjustable mounting between 350mm brackets. Constructed from AISI 304 stainless steel with Scotch Brite finish for hygiene compliance.
Commercial Application
Wall shelving eliminates floor clutter and maximises vertical space in kitchens with limited square footage. This unit mounts at operator-selected height to accommodate workflow ergonomics and equipment clearance below. Rails and mounting consoles included for fixed installation.
Typically used for dry goods storage, plate stacking, or holding frequently accessed utensils during service. The 400mm depth accommodates standard commercial plates, gastronorm containers, and mise en place trays. Adjustable bracket positioning allows alignment with existing equipment or countertop heights.
Key Operational Advantages
- AISI 304 stainless steel construction resists corrosion in humid commercial environments
- Scotch Brite finish meets CE, NSF, and CSA hygiene requirements for food contact surfaces
- 1800mm x 400mm usable surface: fits standard 1/1 GN pans lengthwise
- Height-adjustable mounting: operators select installation height between 350mm bracket points
- 9 kg unit weight: suitable for two-person installation without mechanical lifting
- Rails and wall consoles supplied: no separate bracket purchase required
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | THWBS1R184 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 9.0 kg (19.8 lbs) |
Construction & Build Quality
Fabricated from AISI 304 stainless steel throughout. Scotch Brite surface treatment provides non-porous finish required for food contact zones. All brackets, rails, and shelf plate use 304-grade material to prevent galvanic corrosion at fastener points.
- AISI 304 stainless steel shelf plate, brackets, and mounting rails
- Scotch Brite finish: cleanable with commercial quaternary ammonium or chlorine sanitisers
- Welded bracket joints: no mechanical fasteners exposed to food splash
- Ships disassembled: 9 kg total crated weight for freight efficiency
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Turkish-manufactured commercial kitchen equipment to buyers in the UK, Europe, USA, Canada, Middle East, and Africa. This unit ships disassembled with all mounting hardware included. Freight quotations available for multi-unit orders or project supply.
Frequently Asked Questions
Q: Is this shelf constructed from 304 or 430 grade stainless steel?
A: AISI 304 stainless steel throughout: shelf plate, brackets, rails, and fasteners. This grade provides superior corrosion resistance in commercial kitchens with frequent wash-down and acidic food contact.
Q: What is the maximum load capacity for this 1800mm shelf?
A: Load capacity depends on wall substrate and bracket spacing. Typical installation on masonry or steel stud with proper anchors supports 60-80 kg distributed load. Contact for engineered load calculations if storing heavy equipment.
Q: Can mounting height be adjusted after installation?
A: Yes. Brackets allow vertical repositioning along wall rails within the 350mm range. Relocating the shelf requires loosening bracket bolts and re-tightening at new height. No drilling of additional holes required.
Q: Is a splash-back or upstand available for this model?
A: This model ships as open shelf without rear upstand. Custom splash-backs can be fabricated to specification for wet prep areas. Contact with application details for quotation on modified units.
Q: Can this shelf be supplied in custom widths or depths?
A: Standard production is 1800mm x 400mm as listed. Custom sizing available for project orders with minimum quantities. Lead time increases to 8-10 weeks for non-standard dimensions.