





Ask a Question About This Product
- Stock: In Stock
- Model: THWBS2R183
- SKU: THWBS2R183
This wall-mounted unit organises dry goods, smallwares, and plated inventory across two independent shelf levels in commercial kitchens. Each shelf spans 1800mm horizontally with 300mm depth. Height-adjustable console brackets enable vertical spacing customisation between 200mm and 400mm to accommodate varying container and equipment sizes.
Commercial Application
Operators mount the unit above prep benches or dishwashing stations to recover floor space and maintain clear traffic lanes. The dual-level design separates clean from soiled items or segregates raw and ready-to-eat storage zones during peak service. Rails and consoles distribute load evenly across the wall fixing points.
Kitchen staff access upper shelves for infrequently used items and lower shelves for high-turnover inventory during mise-en-place. The 300mm depth prevents larger items from falling behind narrower single-tier systems. Adjustable height brackets reconfigure shelf spacing without wall re-drilling when kitchen layout changes.
Key Operational Advantages
- 1800mm span holds up to 50kg per shelf when fixed to structural masonry or stud walls with appropriate fixings
- Height adjustment range 200–400mm between shelves accommodates gastronorm containers from 100mm to 200mm height
- Scotch Brite finish resists fingerprints and minor abrasion during daily contact with trays and containers
- 304-grade stainless steel construction maintains corrosion resistance in high-humidity dishwashing and prep zones
- Rails and consoles ship included; no separate bracket purchase required for standard installation
- 12kg total weight permits two-person installation without mechanical lifting equipment
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | THWBS2R183 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 12.0 kg (26.5 lbs) |
Construction & Build Quality
Frame, shelves, and brackets are fabricated from 304-grade stainless steel with Scotch Brite surface treatment. Welded rail-to-console joints distribute vertical load without mechanical fasteners. Sheet metal gauge meets NSF and CE structural requirements for non-food-contact shelving.
- 304 stainless steel resists chloride corrosion from detergent spray and steam condensation
- Scotch Brite directional grain finish hides minor scratches from tray contact
- Continuous rail welding eliminates bracket-to-shelf movement under dynamic loading
- 12-month spare parts warranty covers console brackets and rail sections
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies this unit from UK inventory to commercial buyers across Europe, North America, the Middle East, and Africa. Freight consolidation is available for multi-unit orders to hotel groups and catering chains. Lead time for single units is 5–7 working days within the UK.
Frequently Asked Questions
Q: What stainless steel grade is used in the THWBS2R183 frame and shelves?
A: Frame rails and shelf surfaces are 304-grade stainless steel. Brackets and consoles use the same alloy for uniform corrosion resistance. Material certification is available on request for health authority inspections.
Q: What is the maximum load capacity per shelf when properly installed?
A: Each shelf supports up to 50kg distributed load when fixed to solid masonry or timber studs at 600mm centres. Plasterboard substrates require toggle fixings or backing plates. Concentrated point loads above 20kg require additional intermediate brackets.
Q: Can the vertical spacing between shelves be changed after initial installation?
A: Console brackets adjust vertically along the rail without removing wall fixings. Adjustment range is 200mm to 400mm between shelf centres. Repositioning requires loosening bracket clamps, not re-drilling the wall.
Q: Are splash-back panels available for this wall shelf model?
A: This unit ships without integral splash-back. Separate stainless steel splash-back panels in 1800mm width are available as accessories. Panels mount independently to the wall above the top shelf.
Q: Can TurcoBazaar supply this shelf in custom widths for non-standard wall sections?
A: Custom widths from 1200mm to 2400mm are manufactured to order with 8–10 week lead time. Depth remains 300mm; custom depth requires separate quotation. Minimum order quantity for bespoke sizing is 5 units.