Industrial Bone saw 2020mm Stainless steel | TurcoBazaar HLS2020

Industrial Bone saw 2020mm Stainless steel | TurcoBazaar HLS2020
Industrial Bone saw 2020mm Stainless steel | TurcoBazaar HLS2020
This offer ends in:
Days
Hours
Min
Sec
from Save -69%
£1,318.80
£4,297.20
Ex Tax: £1,318.80
  • Stock: In Stock
  • Brand: Zodex
  • Model: HLS2020
  • SKU: HLS2020
Sold: 0
Views: 987
UK-Based Supplier
Worldwide Shipping
Technical Support
Spare Parts & After-Sales

The HLS2020 is a floor-standing bone saw for commercial meat processing. It handles fresh and frozen product cuts in butchery operations, hotel kitchens, and catering production lines. The 250mm blade runs at 15m/s through a 2020mm continuous band system.

Commercial Application

Butchers and prep kitchens use this machine to portion large cuts, frozen blocks, and bone-in product before service. The 480x600mm work table accommodates primals and whole fish. Automatic blade tensioning reduces setup time between shifts.

Operators run this saw during morning prep to break down delivery stock into kitchen-ready portions. The 1500W motor maintains blade speed under load. Stainless steel construction meets hygiene requirements for direct food contact zones.

Key Operational Advantages

  • Processes frozen meat and bone with 250mm diameter blade at 15m/s cutting speed
  • 480x600mm stainless steel work table supports large primal cuts and whole fish
  • 1500W single-phase motor operates on standard 230V UK supply
  • Automatic blade tensioning system maintains consistent cutting pressure
  • 2020mm continuous band blade with quick-change pulley system
  • 116kg floor-standing frame provides operational stability during use

Technical Specifications

SpecificationDetails
Model / SKUHLS2020
CertificationMeets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements.
Weight116.0 kg (255.7 lbs)

Construction & Build Quality

The HLS2020 uses stainless steel construction throughout food contact and splash zones. The 116kg frame provides stability during high-volume cutting. Motor housing and blade guides are built for daily commercial use.

  • Stainless steel work table, blade housing, and splash guards
  • 1500W commercial-grade motor with thermal protection
  • 250mm diameter pulley system with automatic tensioning
  • 720x620mm footprint with 1680mm overall height

Suitable Operations

  • Commercial kitchens
  • Hotel prep areas
  • Restaurant kitchens
  • Catering production facilities
  • Food processing operations

Procurement & Support

TurcoBazaar supplies the Zodex HLS2020 from UK inventory to commercial buyers in Europe, North America, the Middle East, and Africa. The unit ships as a single 116kg package on pallet freight. CE certification documentation is included for UK and EU installations.

Worldwide ShippingUK, Europe, USA, Canada, Middle East, Africa
📦
Freight QuotationAvailable for larger or heavy units
💬
WhatsApp SupportTechnical guidance before ordering
🔧
Spare PartsAfter-sales support available
Need help choosing the correct model?Contact TurcoBazaar for blade specification guidance or freight quotation to your facility. WhatsApp and email support available for technical questions on installation and operation.
Contact Our Team

Frequently Asked Questions

Q: What grade of stainless steel is used in the HLS2020 construction?

A: The work table and blade housing use food-grade stainless steel that meets CE hygiene standards for direct meat contact. Frame components are commercial-grade steel with corrosion-resistant finish. Full material specifications are available on request.

Q: What is the maximum thickness this saw can cut in a single pass?

A: The 250mm blade diameter and 480x600mm table accommodate cuts up to approximately 200mm in height, depending on bone density and product temperature. Frozen product may require multiple passes for cuts exceeding 150mm. Consult the user manual for specific product recommendations.

Q: Does the HLS2020 include height-adjustable work table or legs?

A: The machine ships with fixed-height construction at 1680mm overall height. Work table is positioned at standard commercial prep height. Adjustable feet are not included in the standard configuration.

Q: Are splash guards or rear splash-back panels included with the unit?

A: The HLS2020 includes integrated blade housing guards as standard. Additional splash-back panels or side guards are not included but can be fabricated on site to match facility requirements. Contact for recommendations on custom guarding.

Q: Can this saw be ordered in custom dimensions or with different blade lengths?

A: The HLS2020 is a fixed-specification model with 2020mm blade and 250mm pulley diameter. Custom sizing is not available from stock. Contact TurcoBazaar if your operation requires alternative blade lengths or table dimensions.

Write a review

Note: HTML is not translated!
Rating
Bad Good

Frequently Asked Questions

Do you ship from the UK to the USA, Europe and worldwide?

Yes. TurcoBazaar is a UK-based commercial kitchen equipment supplier, and we ship to the USA, Canada, Europe, the UK and worldwide. We regularly support restaurants, hotels, takeaways, food trucks, catering companies and commercial kitchens with international equipment supply.

Are your products suitable for the USA, Canada, Europe and the UK?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use. Many products are built to NSF-level hygiene and commercial-use expectations; however, NSF certification requirements may vary by model, country, state, province and local authority. Where required, we can support customers with technical documents for local checks.

Can this equipment be used commercially?

Yes. Our products are designed for restaurants, hotels, takeaways, ghost kitchens, food trucks, cafes, commercial kitchens and professional catering businesses. TurcoBazaar focuses on durable commercial-grade equipment rather than low-quality disposable alternatives.

What gas and electrical options are available?

Depending on the model, equipment can be supplied or produced for LPG, Natural Gas, 110V, 220V or 380V operation. Available options can usually be selected directly on the product page before ordering.

Are your products CE certified?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use, with strong focus on durability, hygiene, safety and international commercial standards.

Do you provide after-sales support?

Yes. TurcoBazaar provides professional after-sales support, technical guidance and spare parts support for commercial customers worldwide, including the UK, Europe, the USA and Canada.

Can you help with international shipping and freight costs?

Yes. We regularly support commercial customers across Europe and worldwide with efficient international shipping solutions. If shipping costs appear high at checkout, contact our team directly. In many cases we can review the destination, product size and freight options to provide a custom shipping quotation where possible.