
Ask a Question About This Product
This offer ends in:
- Stock: In Stock
- Model: TY4552135
The TY4552135 is a powder-coated steel shelving unit built for high-capacity commercial storage. Each of the four shelves supports up to 400 kg evenly distributed. Used in restaurant dry stores, hotel back-of-house areas, and catering prep zones where floor-to-ceiling racking is required.
Commercial Application
Commercial kitchens operate with limited floor space and demand vertical storage for bulk goods, spare equipment, and dry ingredients. This unit occupies 2135 mm of wall length and rises to 1980 mm, converting unused vertical space into organised storage without penetrating the working prep zone.
Shelves are loaded with 25 kg flour sacks, cased beverage stock, boxed dry goods, or reserve cookware. The 455 mm depth accommodates standard commercial storage containers and GN pans. Staff access mid-level shelves during service preparation; upper shelves hold reserve stock rotated weekly.
Key Operational Advantages
- 400 kg maximum load per shelf with even weight distribution across 2135 x 455 mm surface
- 1.5 mm powder-coated steel frame resists humidity and cleaning agents in back-of-house environments
- 15 mm chipboard shelving provides stable flat surface for boxed goods and container stacks
- Four-shelf configuration delivers 1600 kg total capacity across vertical height of 1980 mm
- Disassembled delivery reduces freight volume; assembly uses standard socket tools
- Powder-coated finish eliminates surface oxidation common in high-moisture storage areas
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | TY4552135 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
Construction & Build Quality
Frame members are fabricated from 1.5 mm gauge steel and finished with electrostatic powder coating. Shelf boards are 15 mm compressed chipboard rated for distributed commercial loads. Vertical uprights include pre-drilled mounting points for shelf bracket installation at fixed intervals.
- 1.5 mm steel uprights and cross-bracing withstand lateral loading during daily restocking
- Powder-coated finish bonded at 180°C for chemical and abrasion resistance
- 15 mm chipboard shelves factory-cut to dimensional tolerance of ±2 mm
- Bracket design transfers vertical load through steel frame to floor contact points
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Turkish-manufactured commercial storage equipment to professional kitchens across the UK, Europe, North America, the Middle East, and Africa. Units ship disassembled with hardware packs included. Delivery to UK addresses typically completes within 5–7 working days; international consignments are quoted individually based on destination and order volume.
Frequently Asked Questions
Q: What grade of steel is used in the frame construction?
A: The frame is fabricated from 1.5 mm mild steel with electrostatic powder coating. Steel grade is commercial structural quality, not food-contact stainless. Coating provides corrosion resistance in dry storage environments.
Q: Can shelves be adjusted to different heights after assembly?
A: Shelf brackets install at pre-drilled vertical intervals along the uprights. Height adjustment requires disassembly and repositioning of brackets to alternate hole sets. Interval spacing is fixed during manufacture.
Q: Is a splash-back or rear panel available for this unit?
A: This model is an open-frame shelving system without rear or side panels. It is designed for installation against existing walls in dry storage areas, not as a freestanding partition or wet-area shelving.
Q: What is the maximum safe load if weight is concentrated on one side of a shelf?
A: The 400 kg rating applies to evenly distributed loading across the full shelf surface. Concentrated point loads or uneven distribution reduce safe capacity and may cause shelf deflection or bracket failure.
Q: Can this shelving unit be supplied in custom dimensions?
A: The TY4552135 is a fixed-dimension production model. Custom sizing requires factory tooling and minimum order quantities. Contact TurcoBazaar with dimensional requirements for feasibility assessment and lead time quotation.