







Ask a Question About This Product
This offer ends in:
This stainless steel work table provides 1500×700 mm food-contact workspace with integrated drawer storage for commercial kitchen operations. Three full-depth drawers with ball-bearing slides hold GN1/1 containers and segregated bin compartments. Bottom shelf adds secondary storage for equipment or bulk ingredient containers.
Commercial Application
Central prep tables anchor commercial kitchen workflows where multiple operators require clean surface access and organised utensil storage within arm's reach. Drawer-based organisation reduces aisle traffic during service by keeping tools, thermometers, and portioning equipment at fixed stations.
Worktop height at 900 mm suits standing prep tasks across 8–12 hour shifts. The 500 kg load rating accommodates mixer placement, proofing trays, or stacked chafer pans during high-volume prep cycles without surface deflection.
Key Operational Advantages
- Worktop rated to 500 kg distributed load — supports heavy mixer or proofer placement
- Three drawers with ball-bearing slides — each accepts GN1/1 containers plus two plastic segregation bins
- 201 AISI stainless steel construction with Scotch Brite finish — non-porous surface for food contact compliance
- Bottom shelf spans full width — adds 40+ kg secondary storage for stockpots or bulk supplies
- Upturned edges and under-panel reinforce perimeter — prevents liquid migration to floor during cleaning
- Ships flat-packed at 44 kg — reduces freight cost on multi-unit orders
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | W218150703D |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 44.0 kg (97.0 lbs) |
Construction & Build Quality
Table frame uses 201 AISI stainless steel throughout with Scotch Brite brushed finish for scratch concealment under daily use. Worktop features double-wall construction with perimeter upturn to contain spills during wet prep tasks.
- 201 AISI stainless steel — corrosion-resistant grade meeting CE, NSF, and CSA food contact standards
- Scotch Brite finish — hides minor surface abrasion during knife work and pan handling
- Double-wall worktop — increases rigidity and dampens vibration from mounted equipment
- Ball-bearing drawer slides — tested for 50,000+ cycle lifespan under commercial loading
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial furniture to UK operations and ships worldwide to Europe, USA, Canada, Middle East, and Africa. Freight quotations account for flat-pack dimensions to optimise container or pallet rates on multi-table orders.
Frequently Asked Questions
Q: Is this 201 or 304 stainless steel?
A: This table uses 201 AISI stainless steel. 201 grade contains higher manganese and lower nickel than 304, providing adequate corrosion resistance for dry and moderate-moisture food prep at lower cost. Most health authorities accept 201 for non-marine commercial kitchens.
Q: What is the actual load capacity of the worktop?
A: Worktop supports 500 kg distributed load when weight spreads evenly across the surface. Point loads from mixer feet or single heavy equipment should not exceed 150 kg per corner to avoid localised deflection.
Q: Are the legs adjustable for uneven floors?
A: Table ships with adjustable feet offering ±20 mm height range. This compensates for minor floor irregularities and allows leveling on tiled or epoxy-coated surfaces common in commercial kitchens.
Q: Can I add a splashback to this table?
A: Table design does not include mounting points for rear splashback panels. Freestanding splashbacks may be specified separately if required for wall protection or hygiene barrier compliance.
Q: Is custom sizing available for tighter kitchen layouts?
A: Standard production runs fixed dimensions only. Custom sizing requires factory consultation with 8–12 week lead time and minimum order quantities. Contact TurcoBazaar for feasibility assessment on non-standard widths.