
Ask a Question About This Product
This offer ends in:
The THWSR167A is a 1600mm heated cupboard with sliding doors and integrated rear upstand. It maintains plated meals and crockery at serving temperature between +30°C and +90°C in high-volume catering environments. The unit holds plates and covered dishes across two internal levels with reinforced top surface for workspace use.
Commercial Application
Canteens, banqueting halls, and hotel buffet kitchens use this unit to hold prepared food at temperature during service peaks. The sliding door configuration reduces aisle clearance requirements in narrow pass-through areas. Internal heating fan distributes warmth evenly across both shelf levels.
Staff load plated meals during prep windows ahead of service rushes. The 1600mm width accommodates multiple stacks of 10-inch plates or rows of covered service dishes. Temperature holds for extended periods without drying or quality loss when doors remain closed between retrieval.
Key Operational Advantages
- Maintains +30°C to +90°C range with fan-assisted circulation
- 1600mm × 700mm × 900mm footprint with 100kg structural weight
- Two sliding doors reduce swing clearance in tight service corridors
- Reinforced stainless steel top surface functions as additional workspace
- Adjustable feet compensate for uneven floor surfaces
- Supplied fully assembled and ready for connection
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | THWSR167A |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 100.0 kg (220.5 lbs) |
Construction & Build Quality
Cabinet body and doors fabricated from commercial-grade stainless steel. Heating element and circulation fan mounted in base compartment with thermostat control accessible from front panel. Rear upstand welded to top surface prevents spillage onto rear wall surfaces.
- Stainless steel cabinet and door panels
- Fan-assisted heating element with thermostat
- Welded rear upstand integrated into top surface
- Adjustable leg levellers at all four corners
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial equipment from UK warehouses to buyers in Europe, North America, the Middle East, and Africa. The THWSR167A ships on pallet via freight carrier. International orders receive customs documentation and commercial invoice with HS code classification.
Frequently Asked Questions
Q: What grade of stainless steel is used in the cabinet construction?
A: The THWSR167A uses commercial-grade stainless steel suitable for food contact surfaces. Zodex typically specifies 430-grade for cabinet body and 304-grade for high-contact areas. Confirm grade requirements with TurcoBazaar technical team prior to order.
Q: What is the load capacity of each internal shelf?
A: Each shelf holds approximately 30-40kg of plated meals or stacked crockery when evenly distributed. The reinforced top surface supports up to 50kg workspace load. Overloading shelf corners causes sagging and door alignment issues.
Q: Are the internal shelves height-adjustable?
A: The middle shelf sits in fixed position to maintain even heat distribution from base-mounted fan. Shelf removal is possible for oversized dish storage but affects temperature uniformity during operation.
Q: Does the rear upstand height meet commercial kitchen splash requirements?
A: The integrated upstand measures approximately 100mm height, sufficient for typical food service splash protection. Units placed against tiled walls may not require additional backsplash depending on local health code specifications.
Q: Can TurcoBazaar supply custom width or depth dimensions?
A: The THWSR167A is a standard production model at 1600mm width. Zodex manufactures other widths in the same series: 1000mm, 1200mm, and 1400mm models available. Custom sizing requires factory quotation with 6-8 week lead time.