
Ask a Question About This Product
This offer ends in:
The THWSR166 is a heated holding cupboard with sliding doors, measuring 1600mm wide by 600mm deep. It stores plated meals or heated plates at temperatures between +30°C and +90°C using an internal heating fan. Built for canteen lines, banqueting operations, and high-volume restaurant service.
Commercial Application
Used in pass or service areas where plated food must be held at safe serving temperature before collection. The sliding door design allows staff access without swing clearance in tight service corridors. Internal shelving accommodates stacked plates or plated portions during peak service windows.
Most operators position the unit at the end of a hot preparation line or behind a servery counter. The 1600mm width holds multiple shelves of plated mains during banquet service or buffet changeover. Temperature control maintains food above 63°C during holding periods of up to two hours.
Key Operational Advantages
- Adjustable temperature range +30°C to +90°C controlled by thermostat
- 1600 x 600 x 850mm footprint with reinforced stainless steel working surface
- Two sliding doors with middle shelf included
- Heating fan distributes warm air uniformly across internal volume
- Adjustable feet for levelling on uneven commercial flooring
- Supplied fully assembled — no on-site installation required
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | THWSR166 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 81.0 kg (178.6 lbs) |
Construction & Build Quality
Constructed from stainless steel with a reinforced top surface rated for light prep tasks. The heating fan is housed in a sealed chamber below the storage compartment. All internal surfaces are welded and polished to commercial hygiene standards.
- Stainless steel cabinet and door panels
- Reinforced top surface supports plating or temporary prep use
- Internal heating fan with thermostat control
- Adjustable stainless steel feet with locking mechanism
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the THWSR166 from UK stock with worldwide shipping to Europe, USA, Canada, Middle East, and Africa. The unit is delivered fully assembled and tested. Lead time is 1–3 working days for UK mainland orders.
Frequently Asked Questions
Q: What grade of stainless steel is used in the cabinet construction?
A: The THWSR166 uses commercial-grade stainless steel for all external and internal surfaces. Zodex typically specifies 304-grade steel for food contact areas. Confirm exact grade specification with TurcoBazaar if required for compliance documentation.
Q: What is the load-bearing capacity of the internal shelf?
A: The middle shelf supports approximately 30–40 kg of plated food or stacked plates when weight is evenly distributed. The reinforced top surface handles similar load for temporary prep tasks. Do not overload shelves beyond manufacturer guidance.
Q: Are the feet adjustable for uneven flooring?
A: Yes. Four adjustable stainless steel feet allow levelling on floors with up to 25mm variance. Each foot locks once adjusted to prevent movement during service.
Q: Can additional shelves be fitted inside the cupboard?
A: The unit is supplied with one middle shelf as standard. Additional shelves can be ordered separately through TurcoBazaar if internal height allows. Confirm internal clearance dimensions before ordering extra shelving.
Q: Is custom sizing available for narrower or wider installations?
A: The THWSR166 is a standard production model at 1600mm width. Custom sizing is not available for this unit. TurcoBazaar can quote alternative Zodex models in 1200mm or 1800mm widths if required.