



Ask a Question About This Product
This offer ends in:
The VT67SL is a 600×700 mm work table with integrated bottom shelf for food contact operations. Manufactured from 201 AISI stainless steel with 40×40 mm square legs and adjustable feet. Worktop carries up to 500 kg on a double-walled reinforced deck.
Commercial Application
Work tables provide cleanable, non-porous surfaces for ingredient handling, portioning, assembly, and equipment staging. The bottom shelf stores utensils, trays, or packaged ingredients within reach. Adjustable feet compensate for uneven floors to maintain stable work height.
Used during prep shifts for vegetable trimming, plating, and sandwich assembly. The 700 mm depth accommodates cutting boards and mixing bowls without overhang. 500 kg capacity supports countertop mixers, slicers, or stacked tray racks.
Key Operational Advantages
- Carries 500 kg on double-walled stainless steel worktop with 60 mm edge reinforcement
- 40×40 mm square legs in 201 AISI stainless steel with height-adjustable feet
- Bottom shelf provides 600×700 mm storage plane for trays and equipment
- Scotch Brite finish reduces visible scratches during daily use
- Upturned edges contain spills and prevent runoff onto floors
- Disassembled shipping reduces freight cost for multi-unit orders
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | VT67SL |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 22.0 kg (48.5 lbs) |
Construction & Build Quality
The VT67SL uses 201 AISI stainless steel for the worktop, legs, and shelf. Worktop is double-walled with internal bracing to distribute static loads. Legs are welded square tube with threaded adjusters at each corner.
- 201 AISI stainless steel throughout with Scotch Brite surface finish
- Double-walled worktop with 60 mm reinforced perimeter
- 40×40 mm square tube legs with threaded foot levellers
- Under-panel shelf welded to leg frame for structural rigidity
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the VT67SL direct from Zodex manufacturing in Turkey to commercial buyers in the UK, Europe, USA, Canada, Middle East, and Africa. Pricing includes CE certification documentation for UK and EU compliance. Units ship disassembled to reduce container volume on multi-table orders.
Frequently Asked Questions
Q: Is this table 304 or 201 grade stainless steel?
A: The VT67SL is manufactured in 201 AISI stainless steel. This grade provides corrosion resistance suitable for dry and prepared food contact in temperature-controlled kitchens. 304 grade is available in custom orders for wet processing or outdoor use.
Q: What is the maximum load capacity?
A: The worktop carries up to 500 kg static load when weight is distributed evenly. Concentrated point loads should not exceed 150 kg on the centre of the deck. The bottom shelf is rated for 80 kg uniformly distributed.
Q: Are the legs adjustable for uneven floors?
A: Each leg has a threaded foot leveller with 20 mm adjustment range. Standard installation height is 850 mm from floor to worktop. Levellers compensate for floor slopes up to 15 mm across the 700 mm depth.
Q: Can a splash-back be added to the table?
A: The VT67SL ships without an upstand. Splash-backs in 100 mm or 150 mm height can be retrofitted to the rear or side edges. Contact TurcoBazaar with installation drawings for custom upstand fabrication.
Q: Is custom sizing available for tighter spaces?
A: Zodex manufactures tables in 100 mm increments from 400 mm to 2400 mm length and 600 mm to 800 mm depth. Custom widths require minimum order quantities of four units. Lead time is 6–8 weeks for non-standard dimensions.