



Ask a Question About This Product
This offer ends in:
The THATS186A2D is an 1800x600x900mm stainless steel work table with two drawers, bottom shelf, and 100mm rear upstand. Manufactured by Zodex in 201 AISI stainless steel with 40x40mm square legs and adjustable feet. Used in commercial kitchens, hotel prep areas, and catering facilities for hygienic food contact work.
Commercial Application
This table serves as a fixed prep station in commercial kitchens where food contact surfaces require non-porous, cleanable materials. The two drawers store utensils and small tools within arm's reach during prep shifts. The bottom shelf holds dry goods, equipment, or spare containers below the work surface.
The 100mm rear upstand prevents liquid spills from running down walls during wet prep tasks. The 1800mm length accommodates multiple operators working side-by-side during high-volume service prep. Adjustable feet allow leveling on uneven commercial kitchen floors.
Key Operational Advantages
- 201 AISI stainless steel construction with Scotch Brite finish for hygiene compliance
- 500 kg load capacity worktop with double-walled reinforced construction
- Height adjustable 850-900mm via threaded feet for operator ergonomics
- Two full-width drawers for immediate tool access during prep workflow
- 40x40mm square leg frame with bottom shelf rated for dry storage
- 100mm rear upstand prevents wall splash during wet food prep tasks
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | THATS186A2D |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 40.0 kg (88.2 lbs) |
Construction & Build Quality
The worktop uses double-walled 201 AISI stainless steel with 60mm edge reinforcement for the 500 kg load rating. Square 40x40mm legs provide lateral stability under uneven loads. Scotch Brite finish meets commercial kitchen hygiene standards for food contact surfaces.
- 201 AISI stainless steel sheet throughout with Scotch Brite surface
- Double-walled worktop construction rated to 500 kg distributed load
- 40x40mm square tube leg frame with threaded adjustable feet
- Drawer slides rated for commercial kitchen cycle frequency
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies this Zodex work table from UK inventory to commercial buyers in the UK, Europe, USA, Canada, Middle East, and Africa. Freight quoted separately for quantities over single units. CE certification applies to UK and EU installations; equivalent NSF and CSA standards met for North American deployments.
Frequently Asked Questions
Q: Is this 304 or 430 grade stainless steel?
A: The THATS186A2D uses 201 AISI stainless steel, a commercial-grade alloy with adequate corrosion resistance for indoor kitchen environments. It offers lower material cost than 304 while meeting food contact hygiene standards.
Q: What is the actual load-bearing capacity of the worktop?
A: The reinforced double-walled worktop is rated to 500 kg distributed load. Concentrated point loads above 150 kg should be spread across support points to avoid localized deformation.
Q: Are the legs or shelf height adjustable?
A: Threaded feet allow height adjustment between 850-900mm to accommodate floor irregularities and operator preference. The bottom shelf position is fixed during assembly.
Q: Can the upstand be removed or is it welded?
A: The 100mm rear upstand is welded to the worktop during manufacturing and cannot be removed. Tables without upstands are available as separate models.
Q: Is custom sizing available for narrower depth installations?
A: This model is manufactured at 1800x600mm as standard. Custom widths or depths require factory quotation with minimum order quantities and extended lead times.