



Ask a Question About This Product
This offer ends in:
The VT147SL is a 1400×700 mm stainless steel work table with undershelf, manufactured by Zodex for commercial food preparation. It provides a hygienic, non-porous surface in compliance with CE, NSF, and CSA standards. The unit is deployed in hotel kitchens, restaurants, catering facilities, and food processing operations where workspace hygiene and load capacity are essential.
Commercial Application
This table serves as a primary prep station in commercial kitchens where food contact surfaces must meet hygiene regulations. The undershelf provides storage for utensils, containers, or small equipment, keeping them accessible during service. Adjustable feet allow levelling on uneven floors and maintain compliance with cleanability standards by preventing contact with wet surfaces.
During service, the work surface handles ingredient preparation, plating, and equipment staging. The 500 kg load capacity supports heavy mixers, slicers, or bulk ingredient containers without deflection. The upturned edges contain spills and prevent cross-contamination to adjacent zones.
Key Operational Advantages
- 201 AISI stainless steel construction with Scotch Brite finish for cleanability
- 500 kg worktop load capacity with double-walled reinforced construction
- 40×40 mm square stainless steel legs with adjustable feet (830–870 mm height range)
- Undershelf increases usable storage by approximately 0.98 m²
- Upturned edges contain liquids and prevent drip migration
- Ships flat-packed at 29 kg for cost-effective freight
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | VT147SL |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 29.0 kg (63.9 lbs) |
Construction & Build Quality
The worktop uses double-walled 201 AISI stainless steel with 60 mm reinforcement for rigidity under load. Square profile legs (40×40 mm) are welded to the frame and fitted with adjustable feet. The Scotch Brite finish reduces visible scratching and simplifies sanitation between prep cycles.
- 201 AISI stainless steel frame and surfaces
- Double-walled worktop with 60 mm reinforcement profile
- Welded square leg construction with height-adjustable feet
- Scotch Brite finish on all food contact zones
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial stainless steel tables to the UK, Europe, USA, Canada, Middle East, and Africa. The VT147SL ships flat-packed from UK stock or direct from the Turkish manufacturer depending on order volume. Freight quotations account for dimensional weight and destination customs procedures.
Frequently Asked Questions
Q: What grade of stainless steel is used in the VT147SL?
A: The frame, worktop, and undershelf are constructed from 201 AISI stainless steel. This grade provides adequate corrosion resistance for dry and moist food prep environments. It is not suitable for continuous salt water or acidic chemical exposure.
Q: What is the maximum safe load for the worktop?
A: The worktop supports up to 500 kg when load is distributed evenly across the surface. Point loads (e.g., single heavy mixer in one corner) should not exceed 150 kg. The undershelf is rated for 80 kg distributed load.
Q: Can the height or shelf position be adjusted after assembly?
A: Height adjusts between 830 mm and 870 mm via threaded feet. The undershelf position is fixed during assembly and cannot be repositioned without disassembly and re-welding.
Q: Are splash-back panels available for this model?
A: Splash-backs are not included but can be fabricated and fitted for orders of six or more units. Standard height is 300 mm. Custom splash-back orders add 3–4 weeks to lead time.
Q: Can this table be supplied in custom dimensions?
A: Custom lengths, depths, and heights are available for orders above six units with a 4–6 week lead time. Minimum width is 600 mm; maximum length is 2400 mm before additional leg supports are required.