



Ask a Question About This Product
This offer ends in:
The VT166SL is a stainless steel work table with integrated lower shelf, measuring 1600×600×850 mm. It provides a food-safe preparation surface for commercial kitchens, hotel prep areas, and catering production facilities. The unit ships flat-packed and weighs 40 kg assembled.
Commercial Application
Food preparation zones require non-porous surfaces that withstand repeated cleaning with commercial detergents and sanitisers. This table provides a dedicated workspace for ingredient prep, plating, and assembly tasks where cross-contamination risk must be minimised. The lower shelf holds backup stock, utensils, or storage containers within arm's reach.
During service, the table functions as a stationary prep station or pass-through zone between cooking and plating areas. The 1600 mm length accommodates multiple operators working side-by-side during high-volume periods. Height-adjustable feet (830–870 mm) allow levelling on uneven flooring common in older commercial properties.
Key Operational Advantages
- 201 AISI stainless steel construction with Scotch Brite finish for hygiene compliance
- Load capacity rated to 500 kg on reinforced 60 mm double-walled worktop
- 40×40 mm square stainless steel legs with adjustable feet for levelling
- Upturned edges contain spills; under-panel reinforcement prevents worktop deflection
- Lower shelf provides 1600×600 mm secondary storage surface
- CE certified for UK/EU; meets NSF and CSA equivalents for North American installations
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | VT166SL |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 40.0 kg (88.2 lbs) |
Construction & Build Quality
The worktop uses double-walled 201 AISI stainless steel with 60 mm depth for rigidity under load. Square 40×40 mm legs provide vertical support without wobble. All surfaces carry Scotch Brite finish to resist fingerprints and maintain cleanability between service periods.
- 201 AISI stainless steel throughout (legs, worktop, shelf, framework)
- Double-walled worktop construction rated to 500 kg distributed load
- Scotch Brite surface finish resists scratching and simplifies sanitation
- Adjustable feet compensate for floor irregularities up to 40 mm
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial furniture from UK inventory to buyers in Europe, North America, the Middle East, and Africa. The VT166SL ships flat-packed with assembly hardware and instructions. Lead times vary by destination; UK mainland deliveries typically complete within 5–7 working days.
Frequently Asked Questions
Q: What grade of stainless steel is used in the VT166SL?
A: The unit uses 201 AISI stainless steel for all components including worktop, legs, shelf, and framework. This grade provides corrosion resistance suitable for indoor commercial kitchen environments with regular cleaning. For high-salinity or outdoor installations, specify 304 grade at time of order.
Q: What is the maximum load capacity of the worktop?
A: The double-walled 60 mm worktop is rated to 500 kg evenly distributed load. Concentrated point loads should not exceed 150 kg per square metre to avoid localised deflection. The lower shelf supports up to 80 kg distributed load.
Q: Are the legs and shelf height adjustable?
A: The legs include adjustable feet providing 40 mm of height adjustment (830–870 mm total working height). The lower shelf is fixed at approximately 200 mm above floor level. Custom shelf positioning is not available on standard units.
Q: Can a splash-back be fitted to the VT166SL?
A: No integrated splash-back is included with the standard model. Wall-mounted splash-backs can be installed separately if the table is positioned against a wall. Freestanding splash-back frames are available as a custom modification; contact for pricing and lead time.
Q: Is custom sizing available for this work table?
A: Zodex manufactures tables in standard modular dimensions; the VT166SL is fixed at 1600×600×850 mm. Custom widths, depths, or configurations require factory quotation with minimum order quantities. Lead times for bespoke sizing typically extend 8–12 weeks from deposit.