





Ask a Question About This Product
This offer ends in:
The THATS166A is a 1600×600 mm stainless steel work table with bottom shelf and rear upstand. It provides a hygienic food-contact surface for prep operations in commercial kitchens, hotel back-of-house areas, and catering production lines. The unit is manufactured by Zodex and meets CE hygiene standards applicable across UK, EU, USA, and Canadian markets.
Commercial Application
Stainless steel work tables form the core of food prep zones where raw product handling, plating, and assembly take place. Non-porous surfaces prevent bacterial harbourage and tolerate repeated chemical cleaning cycles. This model integrates into centralised prep areas where staff work standing and require both worktop and shelf storage within arm's reach.
The 100 mm rear upstand reduces wall splash during portioning, vegetable prep, or tray assembly. Bottom shelf holds stored containers, trays, or pre-portioned ingredients below the main work plane. Adjustable feet compensate for uneven floors common in older kitchens or repurposed commercial spaces.
Key Operational Advantages
- 201 AISI stainless steel construction with Scotch Brite finish resists corrosion in high-moisture environments
- 500 kg load capacity supports mixer placement, stockpots, or stacked tray operations
- 40×40 mm square legs with adjustable feet allow height range from 850 to 900 mm
- Bottom shelf and 100 mm upstand included as standard
- Dimensions: 1600 mm width × 600 mm depth × 900 mm height (adjustable)
- Weight: 40 kg — manageable for two-person assembly
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | THATS166A |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 40.0 kg (88.2 lbs) |
Construction & Build Quality
The worktop is fabricated from double-walled 201 AISI stainless steel with Scotch Brite finish. Square tubular legs are welded to reinforced frame structure. Adjustable feet provide 50 mm height compensation. All surfaces are cleanable to CE hygiene standards and compatible with quaternary ammonium and chlorine-based sanitisers.
- 201 AISI stainless steel throughout — worktop, legs, shelf, upstand
- Double-walled worktop construction rated to 500 kg distributed load
- Scotch Brite finish reduces visible scratching during daily use
- Ships disassembled for freight efficiency — bolted assembly required on site
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex-manufactured stainless steel tables from UK stock and Turkish production lines. Units ship to commercial buyers in the United Kingdom, European Union, United States, Canada, Middle East, and sub-Saharan Africa. Freight is calculated per destination and consolidation opportunity. Multi-unit orders qualify for pallet pricing.
Frequently Asked Questions
Q: What grade of stainless steel is used in the THATS166A?
A: The table is constructed from 201 AISI stainless steel. This grade offers corrosion resistance suitable for indoor commercial kitchens with normal humidity and non-salted cleaning agents. It is not marine-grade and should not be used in outdoor or high-salinity environments.
Q: What is the maximum load-bearing capacity of the worktop?
A: The reinforced double-walled worktop is rated to 500 kg distributed load. This allows placement of floor mixers, stockpots, or stacked gastronorm containers. Concentrated point loads exceeding 100 kg should be cushioned with rubber matting.
Q: Are the legs or shelving height-adjustable?
A: The legs include adjustable feet that provide height adjustment from 850 to 900 mm. The bottom shelf is fixed in position and cannot be relocated. Adjustable feet compensate for uneven floors up to 50 mm variance.
Q: Is the rear upstand removable if wall-mounting is not required?
A: The 100 mm upstand is welded to the worktop frame and cannot be removed. If a flat-edge table is required for island placement, specify this at order stage. TurcoBazaar can source non-upstand variants from Zodex production.
Q: Can TurcoBazaar supply custom-sized stainless steel tables?
A: Yes. Zodex manufactures stainless steel tables in custom widths, depths, and heights for project-specific kitchen layouts. Minimum order quantity is typically four units for bespoke sizing. Lead time increases to 6–8 weeks for custom fabrication.