





Ask a Question About This Product
This offer ends in:
The DW7180 is a full-size stainless steel preparation table measuring 1800×700×965mm with 100mm rear upstand. It provides an open base cavity of approximately 900mm clearance for undercounter refrigeration, ice machines, or storage units. Used in commercial kitchens, hotel prep areas, and catering production facilities where floor-mounted equipment requires overhead workspace.
Commercial Application
Open-base work tables position hygienic food contact surfaces above refrigeration or storage equipment. This configuration reduces floor plan footprint while maintaining compliant workspace for plating, assembly, and ingredient preparation. The 100mm upstand at the rear prevents liquid spills from reaching wall surfaces or electrical fixtures.
During service preparation, the 1800mm length accommodates multiple staff positions for parallel task execution. The absence of an undershelf allows access to equipment controls and drainage lines beneath the table. Load capacity supports batch ingredient containers, small appliances, and cutting equipment without structural deflection.
Key Operational Advantages
- 1800×700mm working surface with 100mm rear upstand for splash containment
- Open base design allows 900mm clearance for undercounter refrigeration or ice machines
- 38×38mm square stainless steel legs with adjustable feet for uneven floor compensation
- Double-walled worktop construction rated to 500kg load capacity
- Scotch Brite finish on food contact surfaces for cleanability and non-reflective appearance
- 28kg assembled weight enables two-person repositioning without mechanical lift
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | DW7180 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 28.0 kg (61.7 lbs) |
Construction & Build Quality
The worktop uses double-walled stainless steel construction with internal reinforcement to distribute static loads across the frame. Legs are fabricated from 38×38mm square-section stainless steel tubing with threaded adjustable feet. All welded joints are ground flush to eliminate bacterial harbourage points.
- Stainless steel frame and worktop with Scotch Brite surface finish
- Double-walled top panel with internal bracing for 500kg load rating
- 38×38mm square-section leg tubing with adjustable levelling feet
- 100mm rear upstand welded to top surface for liquid containment
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial preparation tables to buyers in the UK, Europe, USA, Canada, Middle East, and Africa. The DW7180 ships disassembled with assembly hardware and installation instructions. Freight quotations for consolidated orders or container shipments are provided upon request.
Frequently Asked Questions
Q: What grade of stainless steel is used in the DW7180 worktop and frame?
A: The frame uses 201 AISI stainless steel for structural components. The worktop surface is fabricated from food-grade stainless steel with Scotch Brite finish for hygienic food contact use. All materials meet CE commercial kitchen hygiene standards.
Q: What is the maximum load capacity for the DW7180 work table?
A: The double-walled worktop is rated to 500kg static load when distributed evenly across the surface. Concentrated point loads should not exceed manufacturer guidelines to prevent localised deformation.
Q: Are the legs adjustable for uneven floor surfaces?
A: Yes. Each 38×38mm square leg includes a threaded adjustable foot for levelling compensation. Adjustment range is approximately 15-20mm per leg to accommodate minor floor irregularities.
Q: Can the 100mm rear upstand be removed or is it welded permanently?
A: The upstand is welded to the rear edge of the worktop as a permanent feature. It cannot be removed without cutting equipment. Tables without upstands are available as separate models.
Q: Is custom sizing available for different kitchen layouts?
A: TurcoBazaar can quote custom dimensions for width, depth, and height based on operational requirements. Minimum order quantities and lead times apply to non-standard configurations.