Stainless Steel Folding Table 800×600×910mm | TurcoBazaar JSN258

Stainless Steel Folding Table 800×600×910mm | TurcoBazaar JSN258
Stainless Steel Folding Table 800×600×910mm | TurcoBazaar JSN258
Stainless Steel Folding Table 800×600×910mm | TurcoBazaar JSN258
Stainless Steel Folding Table 800×600×910mm | TurcoBazaar JSN258
Stainless Steel Folding Table 800×600×910mm | TurcoBazaar JSN258
This offer ends in:
Days
Hours
Min
Sec
from Save -60%
£81.60
£202.80
Ex Tax: £81.60
  • Stock: In Stock
  • Brand: Zodex
  • Model: JSN258
  • SKU: JSN258
Sold: 0
Views: 1213
UK-Based Supplier
Worldwide Shipping
Technical Support
Spare Parts & After-Sales

The JSN258 is an 800×600mm stainless steel work surface mounted on a folding frame. It weighs 8.7 kg and sets up in seconds for temporary prep stations, buffet lines, or mobile catering operations. Hotels, restaurants, and catering facilities use it where fixed benching cannot be installed.

Commercial Application

Commercial kitchens require flexible workspace during peak service or event catering. This table deploys when additional clean surface is needed for plating, ingredient staging, or equipment placement. It folds flat when not in use, freeing floor space in compact prep areas.

Operators unfold the unit before service for auxiliary prep work or final plating tasks. The 910mm working height matches standard commercial bench ergonomics. After service, the table folds and stores vertically against walls or in mobile storage cages.

Key Operational Advantages

  • SS201 stainless steel top resists corrosion in wet commercial environments
  • Folding square-tube frame collapses to 50mm thickness for vertical storage
  • 8.7 kg total weight allows single-operator transport between prep zones
  • 800×600mm footprint fits through standard doorways when folded
  • 910mm working height aligns with NSF and CE commercial kitchen bench standards
  • CE certified for food contact surface hygiene compliance in UK and EU markets

Technical Specifications

SpecificationDetails
Model / SKUJSN258
CertificationMeets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements.
Weight8.7 kg (19.2 lbs)

Construction & Build Quality

The tabletop uses SS201 stainless steel over a welded square-tube frame. Folding hinges lock open under load and release for collapse. All contact points are stainless to prevent corrosion in wash-down environments.

  • SS201 grade stainless steel top with food-safe surface finish
  • Reinforced square-tube frame distributes load across folding geometry
  • Hinge mechanism rated for repeated daily folding cycles
  • Non-slip rubber foot pads on frame contact points

Suitable Operations

  • Commercial kitchens
  • Hotel prep areas
  • Restaurant kitchens
  • Catering production facilities
  • Food processing operations

Procurement & Support

TurcoBazaar supplies the JSN258 from UK stock to commercial buyers in the United Kingdom, Europe, United States, Canada, Middle East, and Africa. Zodex manufactures the unit in Turkey under CE certification. Freight quotations account for folded dimensions and 8.7 kg shipping weight.

Worldwide ShippingUK, Europe, USA, Canada, Middle East, Africa
📦
Freight QuotationAvailable for larger or heavy units
💬
WhatsApp SupportTechnical guidance before ordering
🔧
Spare PartsAfter-sales support available
Need help choosing the correct model?Contact TurcoBazaar for technical specifications or freight quotation to your region. WhatsApp enquiries receive same-day response for stock availability and delivery lead times.
Contact Our Team

Frequently Asked Questions

Q: What grade of stainless steel is the JSN258 tabletop?

A: The top surface is SS201 stainless steel. This grade provides corrosion resistance in commercial kitchen humidity and cleaning chemical exposure. It meets CE food contact surface standards for UK and EU operations.

Q: What is the load-bearing capacity of the folded frame?

A: The manufacturer rates the table for 50–60 kg static load when fully deployed and locked. Distribute weight evenly across the 800×600mm surface. Do not use as climbing platform or concentrate load at unsupported edges.

Q: Can the legs be adjusted for uneven floors?

A: The JSN258 has fixed-height folding legs at 910mm working height. Rubber foot pads provide minor leveling on slight gradients. For permanent installation on uneven floors, use shim plates under contact points.

Q: Is a splash-back available for this model?

A: The JSN258 ships as a flat-top folding table without splash-back. Operators requiring rear wall protection should install separate stainless backsplash panels or position the table away from walls during use.

Q: Can TurcoBazaar supply custom dimensions?

A: The JSN258 is a standard 800×600mm production model. Custom sizing requires factory tooling changes and minimum order quantities. Contact TurcoBazaar technical team for feasibility and lead times on non-standard dimensions.

Write a review

Note: HTML is not translated!
Rating
Bad Good

Frequently Asked Questions

Do you ship from the UK to the USA, Europe and worldwide?

Yes. TurcoBazaar is a UK-based commercial kitchen equipment supplier, and we ship to the USA, Canada, Europe, the UK and worldwide. We regularly support restaurants, hotels, takeaways, food trucks, catering companies and commercial kitchens with international equipment supply.

Are your products suitable for the USA, Canada, Europe and the UK?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use. Many products are built to NSF-level hygiene and commercial-use expectations; however, NSF certification requirements may vary by model, country, state, province and local authority. Where required, we can support customers with technical documents for local checks.

Can this equipment be used commercially?

Yes. Our products are designed for restaurants, hotels, takeaways, ghost kitchens, food trucks, cafes, commercial kitchens and professional catering businesses. TurcoBazaar focuses on durable commercial-grade equipment rather than low-quality disposable alternatives.

What gas and electrical options are available?

Depending on the model, equipment can be supplied or produced for LPG, Natural Gas, 110V, 220V or 380V operation. Available options can usually be selected directly on the product page before ordering.

Are your products CE certified?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use, with strong focus on durability, hygiene, safety and international commercial standards.

Do you provide after-sales support?

Yes. TurcoBazaar provides professional after-sales support, technical guidance and spare parts support for commercial customers worldwide, including the UK, Europe, the USA and Canada.

Can you help with international shipping and freight costs?

Yes. We regularly support commercial customers across Europe and worldwide with efficient international shipping solutions. If shipping costs appear high at checkout, contact our team directly. In many cases we can review the destination, product size and freight options to provide a custom shipping quotation where possible.