



Ask a Question About This Product
This offer ends in:
- Stock: In Stock
- Model: WTG60180
- SKU: WTG60180
The WTG60180 is a three-tier stainless steel prep table with integrated GN1/9 tray capacity for 14 pans. At 1800 mm wide, it consolidates workspace, overhead storage, and tray staging into one 37 kg unit. Used in hotel kitchens, catering prep areas, and high-volume restaurants where floor space and tray handling converge.
Commercial Application
Operators position this table where cold prep, tray portioning, or staging happens before service. The GN1/9 shelf holds 14 trays at waist level, eliminating repeated bending and reducing motion between refrigeration and dispatch. The upper shelf stores tools, containers, or wrapped product within arm's reach.
During service, the middle work surface handles plating, garnish assembly, or sandwich build. Galvanised legs and adjustable plastic feet allow levelling on uneven floors. Trays load directly from the lower GN shelf when cold holding or mise-en-place is required beside the main line.
Key Operational Advantages
- 1800 × 600 × 1500 mm footprint with three functional tiers
- GN1/9 shelf holds 14 trays without additional racks
- 37 kg weight permits two-person relocation within the kitchen
- Galvanised legs and plastic feet enable floor levelling
- Upper shelf provides 1800 mm × 300 mm overhead storage
- Stainless steel surfaces meet CE, NSF, and CSA hygiene standards
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | WTG60180 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 37.0 kg (81.6 lbs) |
Construction & Build Quality
All food contact surfaces are stainless steel. Legs are galvanised steel with threaded adjustable plastic feet. Welds are continuous along shelf brackets. The GN shelf frame is fixed; the upper shelf mounts on rear brackets with front support struts.
- Stainless steel top, shelves, and GN tray frame
- Galvanised steel legs with adjustment thread
- Continuous TIG welds on load-bearing joints
- Plastic feet prevent floor marking and allow levelling
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the WTG60180 from UK stock to commercial operators in the United Kingdom, Europe, USA, Canada, Middle East, and Africa. Standard dispatch is 1–3 working days for in-stock units. Freight quotations for multi-unit orders or international consolidation are provided on request.
Frequently Asked Questions
Q: What grade of stainless steel is used on the work surface?
A: The work surface and shelves are stainless steel suitable for food contact under CE and NSF standards. Grade specification (304 or 430) is confirmed at the time of order.
Q: What is the maximum load capacity of the middle work surface?
A: The middle tier supports standard commercial prep loads including mixers, scales, and ingredient containers. Contact TurcoBazaar for specific load ratings if heavy equipment will be mounted.
Q: Are the legs adjustable for uneven floors?
A: Yes. Each leg has a threaded plastic foot with approximately 20 mm adjustment range. This allows levelling on tiled or slightly uneven floors common in older kitchens.
Q: Can a splash-back be added to the rear of the table?
A: Splash-backs are not included as standard but can be fabricated and fitted. Contact the technical team with your height and mounting requirements for a custom quotation.
Q: Are GN1/9 pans included with the table?
A: No. The GN shelf frame is supplied empty. Pans are ordered separately based on depth and lid requirements for your operation.