Stainless Steel Work Table Bottom Shelf 1100x600x900mm | TurcoBazaar ETW11060

Stainless Steel Work Table Bottom Shelf 1100x600x900mm | TurcoBazaar ETW11060
3-4 Weeks
Stainless Steel Work Table Bottom Shelf 1100x600x900mm | TurcoBazaar ETW11060
This offer ends in:
Days
Hours
Min
Sec
from Save -59%
£123.60
£304.80
Ex Tax: £123.60
  • Stock: 3-4 Weeks
  • Brand: Zodex
  • Model: ETW11060
  • SKU: ETW11060
Sold: 0
Views: 858
UK-Based Supplier
Worldwide Shipping
Technical Support
Spare Parts & After-Sales

The ETW11060 is a flatpack stainless steel work table measuring 1100×600×900mm, used for hygienic food preparation in commercial kitchens. It features a 1.0mm 201-grade stainless steel top shelf and galvanised undershelf with adjustable plastic bullet feet. The unit ships disassembled and weighs 17 kg.

Commercial Application

Work tables with lower shelving provide organised storage of ingredients, utensils, and equipment during active service. The 600mm depth suits standard kitchen layouts where wall clearance or aisle width is limited. Galvanised undershelf holds dry goods, small appliances, or prep containers.

Used in prep zones, plating stations, or as secondary surfaces adjacent to cooking equipment. The 900mm height aligns with counter-height workflow. Lower shelf capacity reduces trips to walk-in storage during peak periods.

Key Operational Advantages

  • 1.0mm 201 stainless steel top — food-safe, non-porous surface for direct prep work
  • Galvanised steel undershelf — corrosion-resistant dry storage layer
  • Flatpack construction — reduces shipping volume and cost for international freight
  • Adjustable bullet feet — compensates for uneven floors in older kitchen buildings
  • CE certified — meets UK, EU, NSF (USA), and CSA (Canada) commercial kitchen standards
  • 17 kg shipping weight — manageable for two-person assembly without lifting equipment

Technical Specifications

SpecificationDetails
Model / SKUETW11060
CertificationMeets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements.
Weight17.0 kg (37.5 lbs)

Construction & Build Quality

Top shelf uses 1.0mm 201-grade stainless steel with welded seams. Undershelf and hat channel are hot-dip galvanised steel. Legs and sockets are galvanised tube steel. Plastic bullet feet provide height adjustment and floor protection.

  • 201 stainless steel top — lower nickel content than 304, suitable for dry prep and non-acidic contact
  • Galvanised frame and undershelf — zinc coating prevents rust in high-humidity environments
  • Flatpack hat channel construction — reduces flex and provides structural rigidity when assembled
  • Bullet feet with height adjustment — typically ±10mm range for levelling on uneven floors

Suitable Operations

  • Commercial kitchens
  • Hotel prep areas
  • Restaurant kitchens
  • Catering production facilities
  • Food processing operations

Procurement & Support

TurcoBazaar supplies Zodex commercial furniture from UK stock to buyers worldwide. Standard dispatch is 1–3 working days for flatpack units. International freight available to Europe, USA, Canada, Middle East, and Africa with consolidated shipping for multi-unit orders.

Worldwide ShippingUK, Europe, USA, Canada, Middle East, Africa
📦
Freight QuotationAvailable for larger or heavy units
💬
WhatsApp SupportTechnical guidance before ordering
🔧
Spare PartsAfter-sales support available
Need help choosing the correct model?Contact TurcoBazaar for technical specifications, freight quotations, or bulk order pricing. WhatsApp available for rapid response on assembly questions or custom sizing requirements.
Contact Our Team

Frequently Asked Questions

Q: What grade of stainless steel is used for the top shelf?

A: The top shelf is 1.0mm 201-grade stainless steel. This grade contains lower nickel than 304 and is suitable for dry food prep and non-acidic contact. For environments with heavy acidic exposure, 304-grade upgrades are available on request.

Q: What is the load-bearing capacity of the top shelf and undershelf?

A: The top shelf is rated for approximately 80–100 kg evenly distributed. The galvanised undershelf typically supports 40–60 kg depending on load distribution. Concentrated loads should be centred to avoid flex.

Q: Are the legs adjustable for uneven floors?

A: Yes. Plastic bullet feet provide approximately 10mm height adjustment per leg. This compensates for minor floor irregularities common in older commercial kitchens.

Q: Can a splashback be added to this model?

A: This model ships without a splashback. Custom splashback fabrication is available through TurcoBazaar for wall-mounted installations or hygiene compliance. Contact for sizing and material options.

Q: Is custom sizing available for non-standard kitchen layouts?

A: Yes. Zodex manufactures custom dimensions for width, depth, and height. Lead times typically extend 2–4 weeks for bespoke units. Minimum order quantities may apply for non-standard sizes.

Write a review

Note: HTML is not translated!
Rating
Bad Good

Frequently Asked Questions

Do you ship from the UK to the USA, Europe and worldwide?

Yes. TurcoBazaar is a UK-based commercial kitchen equipment supplier, and we ship to the USA, Canada, Europe, the UK and worldwide. We regularly support restaurants, hotels, takeaways, food trucks, catering companies and commercial kitchens with international equipment supply.

Are your products suitable for the USA, Canada, Europe and the UK?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use. Many products are built to NSF-level hygiene and commercial-use expectations; however, NSF certification requirements may vary by model, country, state, province and local authority. Where required, we can support customers with technical documents for local checks.

Can this equipment be used commercially?

Yes. Our products are designed for restaurants, hotels, takeaways, ghost kitchens, food trucks, cafes, commercial kitchens and professional catering businesses. TurcoBazaar focuses on durable commercial-grade equipment rather than low-quality disposable alternatives.

What gas and electrical options are available?

Depending on the model, equipment can be supplied or produced for LPG, Natural Gas, 110V, 220V or 380V operation. Available options can usually be selected directly on the product page before ordering.

Are your products CE certified?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use, with strong focus on durability, hygiene, safety and international commercial standards.

Do you provide after-sales support?

Yes. TurcoBazaar provides professional after-sales support, technical guidance and spare parts support for commercial customers worldwide, including the UK, Europe, the USA and Canada.

Can you help with international shipping and freight costs?

Yes. We regularly support commercial customers across Europe and worldwide with efficient international shipping solutions. If shipping costs appear high at checkout, contact our team directly. In many cases we can review the destination, product size and freight options to provide a custom shipping quotation where possible.