Stainless Steel Work Table Bottom Shelf 1100x700x900mm | TurcoBazaar ETW11070

Stainless Steel Work Table Bottom Shelf 1100x700x900mm | TurcoBazaar ETW11070
Stainless Steel Work Table Bottom Shelf 1100x700x900mm | TurcoBazaar ETW11070
This offer ends in:
Days
Hours
Min
Sec
from Save -59%
£127.20
£312.00
Ex Tax: £127.20
  • Stock: In Stock
  • Brand: Zodex
  • Model: ETW11070
  • SKU: ETW11070
Sold: 0
Views: 921
UK-Based Supplier
Worldwide Shipping
Technical Support
Spare Parts & After-Sales

The ETW11070 provides 1100 × 700 mm stainless steel work surface with integrated galvanised undershelf. Designed for commercial food preparation environments requiring hygienic, non-porous contact surfaces. Flatpack assembly with adjustable plastic feet for uneven floors.

Commercial Application

Used for ingredient preparation, plating assembly, and temporary holding of utensils or containers during service. The galvanised bottom shelf stores equipment below the main work plane. Stainless top meets food contact standards across UK, EU, USA and Canadian regulations.

Installed in prep stations, bakery assembly lines, or as mobile work zones when paired with castors. 900 mm working height suits standing operators. The 700 mm depth fits standard commercial kitchen aisle widths without obstructing traffic flow.

Key Operational Advantages

  • 1.0 mm 201-grade stainless steel top surface resists corrosion and daily chemical cleaning
  • Galvanised steel undershelf and hat channel frame support up to 100 kg distributed load
  • Flatpack delivery reduces freight volume; assembly time under 20 minutes with basic tools
  • Plastic bullet feet allow minor height adjustment on uneven concrete or tile floors
  • Compact 17 kg weight permits single-person repositioning during kitchen layout changes
  • CE-certified construction meets hygiene standards for UK, EU, North American food service operations

Technical Specifications

SpecificationDetails
Model / SKUETW11070
CertificationMeets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements.
Weight17.0 kg (37.5 lbs)

Construction & Build Quality

Top shelf uses 1.0 mm 201-grade stainless steel with square-edge profile. Frame and undershelf are hot-dip galvanised mild steel. Legs insert into galvanised sockets with threaded plastic feet for height adjustment.

  • Welded corner joints eliminate crevices where debris accumulates
  • Galvanised components resist moisture in high-humidity prep zones
  • Removable undershelf simplifies deep cleaning protocols

Suitable Operations

  • Commercial kitchens
  • Hotel prep areas
  • Restaurant kitchens
  • Catering production facilities
  • Food processing operations

Procurement & Support

TurcoBazaar supplies the ETW11070 from UK stock to commercial buyers in Europe, North America, Middle East and Africa. Standard dispatch within 1–3 working days for flatpack units. Freight consolidation available for multi-table orders or hotel fit-out projects.

Worldwide ShippingUK, Europe, USA, Canada, Middle East, Africa
📦
Freight QuotationAvailable for larger or heavy units
💬
WhatsApp SupportTechnical guidance before ordering
🔧
Spare PartsAfter-sales support available
Need help choosing the correct model?Contact TurcoBazaar for technical specifications, load capacity confirmation, or freight quotation for multiple units. WhatsApp enquiries answered during UK business hours.
Contact Our Team

Frequently Asked Questions

Q: Is the top shelf 304 or 430 stainless steel grade?

A: The ETW11070 uses 201-grade stainless steel for the top surface. This alloy offers adequate corrosion resistance for dry prep work and daily cleaning with neutral detergents. For high-salt or acidic environments, request 304-grade alternatives.

Q: What is the maximum load capacity for the work surface?

A: Distributed load capacity is approximately 100 kg across the stainless top when supported by all four legs. Point loads exceeding 40 kg in a single area may deform the 1.0 mm sheet. Mount heavy mixers or slicers on dedicated reinforced stands.

Q: Are the legs height-adjustable?

A: Plastic bullet feet thread into the galvanised leg sockets, providing ±15 mm height adjustment. This compensates for minor floor irregularities. Castors can replace bullet feet if mobility is required.

Q: Can a splashback be added to this model?

A: The ETW11070 ships without splashback. Zodex manufactures bolt-on upstands in 100 mm or 150 mm heights. Order separately and specify edge (rear, left, right) when configuring wall-mounted installations.

Q: Is custom sizing available for non-standard kitchen layouts?

A: Zodex produces work tables in 100 mm increments from 600 mm to 2400 mm length. Custom widths and heights require minimum order quantities. Lead time extends to 4–6 weeks for bespoke dimensions.

Write a review

Note: HTML is not translated!
Rating
Bad Good

Frequently Asked Questions

Do you ship from the UK to the USA, Europe and worldwide?

Yes. TurcoBazaar is a UK-based commercial kitchen equipment supplier, and we ship to the USA, Canada, Europe, the UK and worldwide. We regularly support restaurants, hotels, takeaways, food trucks, catering companies and commercial kitchens with international equipment supply.

Are your products suitable for the USA, Canada, Europe and the UK?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use. Many products are built to NSF-level hygiene and commercial-use expectations; however, NSF certification requirements may vary by model, country, state, province and local authority. Where required, we can support customers with technical documents for local checks.

Can this equipment be used commercially?

Yes. Our products are designed for restaurants, hotels, takeaways, ghost kitchens, food trucks, cafes, commercial kitchens and professional catering businesses. TurcoBazaar focuses on durable commercial-grade equipment rather than low-quality disposable alternatives.

What gas and electrical options are available?

Depending on the model, equipment can be supplied or produced for LPG, Natural Gas, 110V, 220V or 380V operation. Available options can usually be selected directly on the product page before ordering.

Are your products CE certified?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use, with strong focus on durability, hygiene, safety and international commercial standards.

Do you provide after-sales support?

Yes. TurcoBazaar provides professional after-sales support, technical guidance and spare parts support for commercial customers worldwide, including the UK, Europe, the USA and Canada.

Can you help with international shipping and freight costs?

Yes. We regularly support commercial customers across Europe and worldwide with efficient international shipping solutions. If shipping costs appear high at checkout, contact our team directly. In many cases we can review the destination, product size and freight options to provide a custom shipping quotation where possible.