Stainless Steel Work Table Bottom Shelf 1700x600x900mm | TurcoBazaar ETW17060

Stainless Steel Work Table Bottom Shelf 1700x600x900mm | TurcoBazaar ETW17060
Stainless Steel Work Table Bottom Shelf 1700x600x900mm | TurcoBazaar ETW17060
This offer ends in:
Days
Hours
Min
Sec
from Save -57%
£170.40
£396.00
Ex Tax: £170.40
  • Stock: In Stock
  • Brand: Zodex
  • Model: ETW17060
  • SKU: ETW17060
Sold: 0
Views: 870
UK-Based Supplier
Worldwide Shipping
Technical Support
Spare Parts & After-Sales

The ETW17060 is a 1700×600 mm stainless steel work table with integrated lower storage shelf. It provides 1.02 m² of preparation surface at standard 900 mm working height. Used in commercial kitchens for ingredient prep, portioning, and assembly tasks requiring food-contact compliant surfaces.

Commercial Application

Work tables of this dimension handle medium-volume prep operations. The lower galvanised shelf stores mixing bowls, containers, or ingredient bins within reach. Kitchen staff use the flat-top surface for knife work, portion control, and plating during service.

At 1700 mm length, the table accommodates two-person prep stations or dedicated single-task zones. The 600 mm depth fits against walls or forms central island layouts. Bullet feet allow minor height adjustment on uneven floors.

Key Operational Advantages

  • 1.0 mm 201 stainless steel top surface — wipe-clean, non-porous, food-safe
  • Galvanised undershelf and leg structure — corrosion-resistant in humid environments
  • Standard 900 mm height matches commercial counter ergonomics
  • 25 kg weight allows repositioning without lifting equipment
  • Flatpack delivery reduces freight cost on multi-unit orders
  • Plastic bullet feet prevent floor scratching, enable levelling on tile or concrete

Technical Specifications

SpecificationDetails
Model / SKUETW17060
CertificationMeets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements.
Weight25.0 kg (55.1 lbs)

Construction & Build Quality

Top shelf uses 1.0 mm grade 201 stainless steel, welded or folded at edges. Legs and sockets are galvanised mild steel with electro-zinc coating. Undershelf is 1.0 mm galvanised steel secured by hat-channel bracing. Assembly requires basic hand tools; all fasteners supplied.

  • 201 stainless steel top — adequate for dry and moist food contact in non-acidic applications
  • Galvanised steel frame — zinc coating resists oxidation in commercial wash-down areas
  • Bullet feet — height-adjustable plastic components, non-marking on floor finishes

Suitable Operations

  • Commercial kitchens
  • Hotel prep areas
  • Restaurant kitchens
  • Catering production facilities
  • Food processing operations

Procurement & Support

TurcoBazaar supplies Zodex commercial furniture from UK stock to hospitality and catering operations worldwide. Shipping includes UK mainland, European Union, North America, Middle East, and African markets. Multi-unit orders qualify for consolidated freight pricing.

Worldwide ShippingUK, Europe, USA, Canada, Middle East, Africa
📦
Freight QuotationAvailable for larger or heavy units
💬
WhatsApp SupportTechnical guidance before ordering
🔧
Spare PartsAfter-sales support available
Need help choosing the correct model?Contact TurcoBazaar for dimensional drawings, load-capacity data, or multi-unit freight quotations. WhatsApp enquiries answered during UK business hours.
Contact Our Team

Frequently Asked Questions

Q: What grade of stainless steel is the top surface?

A: The ETW17060 uses 1.0 mm grade 201 stainless steel on the work surface. Grade 201 suits general food prep; grade 304 is specified for high-acid or heavy sanitation environments. Zodex offers 304-grade variants on request.

Q: What is the load-bearing capacity of the table and shelf?

A: Top surface supports distributed loads up to 80 kg without permanent deflection. Lower galvanised shelf holds approximately 40 kg evenly spread. Concentrated point loads require reinforcement or alternative models.

Q: Are the legs height-adjustable?

A: Bullet feet allow ±15 mm height adjustment for floor levelling. Leg height is fixed at 900 mm. Custom-height tables require made-to-order specification and extended lead time.

Q: Can a splashback or upstand be added?

A: This model ships without splashback. Zodex manufactures wall-mounted or rear-welded upstands in 100 mm or 150 mm height. Splashbacks are ordered separately and fitted on-site or at factory before dispatch.

Q: Is custom sizing available for non-standard kitchen layouts?

A: Zodex produces bespoke work tables in 50 mm increments from 600 mm to 2400 mm length. Custom depth, height, and shelf configuration incur made-to-order lead times of 4–6 weeks. Minimum order quantity applies to non-catalogue dimensions.

Write a review

Note: HTML is not translated!
Rating
Bad Good

Frequently Asked Questions

Do you ship from the UK to the USA, Europe and worldwide?

Yes. TurcoBazaar is a UK-based commercial kitchen equipment supplier, and we ship to the USA, Canada, Europe, the UK and worldwide. We regularly support restaurants, hotels, takeaways, food trucks, catering companies and commercial kitchens with international equipment supply.

Are your products suitable for the USA, Canada, Europe and the UK?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use. Many products are built to NSF-level hygiene and commercial-use expectations; however, NSF certification requirements may vary by model, country, state, province and local authority. Where required, we can support customers with technical documents for local checks.

Can this equipment be used commercially?

Yes. Our products are designed for restaurants, hotels, takeaways, ghost kitchens, food trucks, cafes, commercial kitchens and professional catering businesses. TurcoBazaar focuses on durable commercial-grade equipment rather than low-quality disposable alternatives.

What gas and electrical options are available?

Depending on the model, equipment can be supplied or produced for LPG, Natural Gas, 110V, 220V or 380V operation. Available options can usually be selected directly on the product page before ordering.

Are your products CE certified?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use, with strong focus on durability, hygiene, safety and international commercial standards.

Do you provide after-sales support?

Yes. TurcoBazaar provides professional after-sales support, technical guidance and spare parts support for commercial customers worldwide, including the UK, Europe, the USA and Canada.

Can you help with international shipping and freight costs?

Yes. We regularly support commercial customers across Europe and worldwide with efficient international shipping solutions. If shipping costs appear high at checkout, contact our team directly. In many cases we can review the destination, product size and freight options to provide a custom shipping quotation where possible.