Stainless Steel Work Table Bottom Shelf 1700x700x900mm | TurcoBazaar ETW17070

Stainless Steel Work Table Bottom Shelf 1700x700x900mm | TurcoBazaar ETW17070
Stainless Steel Work Table Bottom Shelf 1700x700x900mm | TurcoBazaar ETW17070
This offer ends in:
Days
Hours
Min
Sec
from Save -53%
£189.60
£404.40
Ex Tax: £189.60
  • Stock: In Stock
  • Brand: Zodex
  • Model: ETW17070
  • SKU: ETW17070
Sold: 0
Views: 836
UK-Based Supplier
Worldwide Shipping
Technical Support
Spare Parts & After-Sales

The ETW17070 is a flat-packed stainless steel work table with a bottom galvanised undershelf, designed for food preparation in commercial kitchens. It measures 1700×700×900mm and weighs 25kg. Operators assemble the unit on-site using galvanised legs, sockets, and plastic bullet feet.

Commercial Application

Work tables anchor food preparation zones in hotel kitchens, restaurant prep areas, and catering production lines. This model provides 1.19m² of food-contact workspace with an undershelf for bulk ingredient storage or small equipment staging. Assembly takes one person approximately 30 minutes.

The 900mm working height suits prep staff standing for extended shifts. The galvanised undershelf holds dry goods, utensil trays, or backup supplies within reach. Plastic bullet feet allow minor levelling adjustments on uneven commercial kitchen floors.

Key Operational Advantages

  • 1.0mm 201 stainless steel flat top shelf meets CE food hygiene standards
  • 1.0mm galvanised undershelf and hat channel resist corrosion in wet environments
  • 1700mm length accommodates two prep staff working side-by-side
  • Flat-packed delivery reduces freight costs for multi-unit orders
  • Galvanised legs and sockets provide structural load bearing up to typical commercial use
  • Plastic bullet feet protect flooring and enable minor height adjustment

Technical Specifications

SpecificationDetails
Model / SKUETW17070
CertificationMeets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements.
Weight25.0 kg (55.1 lbs)

Construction & Build Quality

The work surface uses 1.0mm 201-grade stainless steel, suitable for food-contact applications. Galvanised steel undershelf, hat channel, legs, and sockets resist moisture in wash-down environments. Plastic bullet feet thread onto leg bases for levelling.

  • 1.0mm 201 stainless steel top shelf — food-safe, non-porous finish
  • Galvanised steel frame components — corrosion-resistant in commercial kitchens
  • Plastic bullet feet — adjustable for minor floor unevenness
  • Flat-pack assembly — all fasteners and fixings supplied

Suitable Operations

  • Commercial kitchens
  • Hotel prep areas
  • Restaurant kitchens
  • Catering production facilities
  • Food processing operations

Procurement & Support

TurcoBazaar supplies the ETW17070 from UK stock to commercial buyers worldwide. Standard delivery covers UK mainland, Europe, USA, Canada, Middle East, and Africa. Freight quotations for multi-unit orders are available on request.

Worldwide ShippingUK, Europe, USA, Canada, Middle East, Africa
📦
Freight QuotationAvailable for larger or heavy units
💬
WhatsApp SupportTechnical guidance before ordering
🔧
Spare PartsAfter-sales support available
Need help choosing the correct model?Contact TurcoBazaar for freight quotations on multiple units or technical guidance on assembly and installation. WhatsApp enquiries answered during UK business hours.
Contact Our Team

Frequently Asked Questions

Q: What grade of stainless steel is the work surface?

A: The top shelf is 1.0mm 201-grade stainless steel, suitable for food-contact use in commercial kitchens. Undershelf and structural components are galvanised steel. Both materials meet CE food hygiene standards.

Q: What is the load-bearing capacity of the work surface and undershelf?

A: The 1.0mm stainless steel top shelf handles typical prep tasks including manual cutting, mixing, and portioning. The galvanised undershelf holds dry goods, utensil trays, or lightweight equipment. Avoid concentrated point loads exceeding 50kg.

Q: Are the legs height-adjustable?

A: Plastic bullet feet thread onto the galvanised leg bases, allowing minor levelling adjustments of approximately ±10mm. The nominal working height is 900mm. Custom leg extensions are not supplied with the standard unit.

Q: Does this model include a splash-back or upstand?

A: No. The ETW17070 ships without a rear splash-back or wall upstand. If wall-mounted protection is required, specify upstand options when ordering or retrofit a compatible splash-back panel.

Q: Can TurcoBazaar supply custom sizes or configurations?

A: Custom dimensions and configurations are available on request for orders of five units or more. Lead time extends to 4–6 weeks for made-to-order sizing. Contact TurcoBazaar with exact specifications for quotation.

Write a review

Note: HTML is not translated!
Rating
Bad Good

Frequently Asked Questions

Do you ship from the UK to the USA, Europe and worldwide?

Yes. TurcoBazaar is a UK-based commercial kitchen equipment supplier, and we ship to the USA, Canada, Europe, the UK and worldwide. We regularly support restaurants, hotels, takeaways, food trucks, catering companies and commercial kitchens with international equipment supply.

Are your products suitable for the USA, Canada, Europe and the UK?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use. Many products are built to NSF-level hygiene and commercial-use expectations; however, NSF certification requirements may vary by model, country, state, province and local authority. Where required, we can support customers with technical documents for local checks.

Can this equipment be used commercially?

Yes. Our products are designed for restaurants, hotels, takeaways, ghost kitchens, food trucks, cafes, commercial kitchens and professional catering businesses. TurcoBazaar focuses on durable commercial-grade equipment rather than low-quality disposable alternatives.

What gas and electrical options are available?

Depending on the model, equipment can be supplied or produced for LPG, Natural Gas, 110V, 220V or 380V operation. Available options can usually be selected directly on the product page before ordering.

Are your products CE certified?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use, with strong focus on durability, hygiene, safety and international commercial standards.

Do you provide after-sales support?

Yes. TurcoBazaar provides professional after-sales support, technical guidance and spare parts support for commercial customers worldwide, including the UK, Europe, the USA and Canada.

Can you help with international shipping and freight costs?

Yes. We regularly support commercial customers across Europe and worldwide with efficient international shipping solutions. If shipping costs appear high at checkout, contact our team directly. In many cases we can review the destination, product size and freight options to provide a custom shipping quotation where possible.