
Ask a Question About This Product
This offer ends in:
The ETW18070B is an 1800×700mm stainless steel work table with integrated bottom shelf and 50mm rear upstand. It provides food-safe workspace in commercial kitchens, prep zones, and catering facilities. Supplied flat-packed for site assembly with galvanised undershelf and adjustable bullet feet.
Commercial Application
Installed against walls in prep areas, walk-in cooler entries, and pass-through zones. The rear upstand prevents liquid run-off onto painted surfaces or tiled walls. Bottom shelf stores containers, equipment, or dry goods beneath the work surface.
Used during mise-en-place, batch prep, or plating workflows. The 1800mm length accommodates two operators working side-by-side. The 700mm depth allows access from a single side without reaching across equipment.
Key Operational Advantages
- 1.0mm 201 stainless steel top with 50mm integral upstand
- 1.0mm galvanised undershelf for dry storage or equipment
- Galvanised legs with adjustable bullet feet for uneven floors
- 1800×700×900mm working height suits standard ergonomic range
- Flat-packed delivery reduces freight costs on bulk orders
- 25kg total weight enables two-person assembly without lifting equipment
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | ETW18070B |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 25.0 kg (55.1 lbs) |
Construction & Build Quality
Top surface is 1.0mm 201-grade stainless steel with satin finish. Undershelf and hat channel are 1.0mm galvanised steel. Legs are galvanised mild steel with plastic bullet feet for height adjustment. Rear upstand is welded to top surface. All joints are TIG-welded and ground flush.
- 201 stainless steel resists corrosion in wet prep environments
- Galvanised undershelf withstands storage loads without sagging
- TIG-welded joints prevent water ingress and bacterial harbourage
- Adjustable feet compensate for ±15mm floor variance
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies this unit to commercial kitchens across the UK, Europe, USA, Canada, Middle East, and Africa. Zodex manufactures to CE-compliant standards. Multi-unit orders qualify for consolidated freight pricing.
Frequently Asked Questions
Q: What grade of stainless steel is the top surface?
A: The work surface is 1.0mm 201-grade stainless steel. It meets food-contact hygiene standards for commercial prep areas. The undershelf is galvanised steel and not intended for direct food contact.
Q: What is the load capacity of the top surface and undershelf?
A: The top surface supports distributed loads up to 150kg. The galvanised undershelf handles 80kg evenly distributed. Concentrated point loads should not exceed 25kg per square foot.
Q: Are the legs adjustable for uneven floors?
A: Each leg has a plastic bullet foot with ±15mm height adjustment. Rotate the foot to level the table on floors with minor gradient. Shims may be required on floors exceeding 15mm variance.
Q: Can the upstand be removed or modified?
A: The 50mm upstand is welded to the rear edge of the top surface and cannot be removed. Custom upstand heights or front-edge upstands are available on request for orders of six or more units.
Q: Is assembly required and what tools are needed?
A: The table ships flat-packed and requires site assembly. Two persons can assemble in 20–30 minutes using a 13mm spanner and screwdriver. All fixing hardware is supplied.