





Ask a Question About This Product
- Stock: In Stock
- Model: WSWB30100
- SKU: WSWB30100
The WSWB30100 is a three-tier wall-mounted stainless steel shelf measuring 1000×300×900mm. It provides vertical storage capacity in commercial kitchens where floor space is limited. Used by prep cooks, line chefs, and kitchen porters to store plates, containers, utensils, and dry ingredients within arm's reach.
Commercial Application
Wall shelving moves stored goods off worktops and floor-level racks. This shelf mounts directly to tiled or brick walls in prep zones, pass areas, and dishwash stations. Kitchen managers use it to increase storage density without reducing aisle width or blocking access to equipment.
During service, line staff retrieve plates, bowls, and garnish containers from the shelves without leaving their station. The open-front design allows visual stock checks. Each of the three shelves can be positioned at different heights to accommodate items of varying size.
Key Operational Advantages
- 1000mm width × 300mm depth × 900mm height provides 0.9m² of usable shelf area across three levels
- Stainless steel construction resists corrosion in high-humidity dishwash and prep environments
- Shelves adjust vertically on wall-mounted rails to fit container heights from 150mm to 400mm
- Open design allows air circulation around stored items, reducing condensation on metal cookware
- CE certification confirms compliance with UK, EU, USA (NSF), and Canada (CSA) commercial kitchen standards
- Unit weighs 11kg for installation by two kitchen staff without lifting equipment
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | WSWB30100 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 11.0 kg (24.3 lbs) |
Construction & Build Quality
The shelf uses food-grade stainless steel for all contact surfaces. Wall rails mount with supplied screws to masonry or stud walls. Shelf brackets slide into rail channels and lock at selected heights with adjustment screws.
- Shelves are 35mm thick with bevelled support brackets for rigidity under load
- Welded corner joints prevent water ingress and bacterial accumulation
- Polished finish allows wipe-down cleaning with standard kitchen detergents
- Rails are pre-drilled for 100mm vertical adjustment increments
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the WSWB30100 from UK warehouse stock to commercial buyers in the UK, Europe, USA, Canada, Middle East, and Africa. Freight is calculated based on destination and order volume. Multiple units ship on consolidated pallets for hotel kitchen fit-outs and multi-site restaurant refurbishments.
Frequently Asked Questions
Q: What grade of stainless steel is used in the WSWB30100?
A: The unit is manufactured from food-grade stainless steel meeting commercial kitchen requirements. Grade 304 is standard for shelf surfaces and brackets. Grade 430 may be used for non-contact structural components depending on production batch.
Q: What is the maximum load capacity per shelf?
A: Each shelf supports up to 40kg when evenly distributed and mounted to solid masonry or timber studs at 600mm centres. Load capacity reduces on plasterboard or hollow walls without additional reinforcement. Wall fixings must match the substrate type.
Q: Can the shelf heights be adjusted after installation?
A: Yes. Shelf brackets slide vertically in the wall rails and lock at any point using adjustment screws. Height changes require loosening the screws, repositioning the bracket, and retightening. No wall remounting is needed.
Q: Is a splash-back available for this model?
A: The WSWB30100 does not include a splash-back panel as standard. A separate stainless steel sheet can be mounted behind the unit if required for hygiene zoning or to protect painted walls. TurcoBazaar supplies splash-backs cut to size on request.
Q: Can this shelf be made in custom dimensions?
A: Custom widths, depths, and heights are available for orders of five units or more. Lead time is typically four to six weeks from Turkey to UK warehouse. Minimum custom width is 600mm; maximum is 2000mm without centre support rails.