





Ask a Question About This Product
- Stock: In Stock
- Model: WSWB30080
- SKU: WSWB30080
Three-tier wall-mounted stainless steel shelf measuring 800mm wide, 300mm deep, 900mm high. Provides vertical storage in commercial kitchens where floor space is limited. Used in prep areas, hot lines, dishwash stations, and dry storage zones.
Commercial Application
Wall-mounted shelving reclaims unused vertical surface in tight production layouts. Keeping small equipment, plates, dry ingredients, and utensils within arm's reach reduces movement during service. The 300mm depth suits most standard commercial dinnerware and ingredient containers.
Three independently adjustable shelves allow operators to configure height based on stored items. Commonly installed above prep tables, handwash stations, or next to cooking lines. Open-shelf design maintains visibility and air circulation required by food safety protocols.
Key Operational Advantages
- Three shelves adjustable along vertical rails using supplied hardware
- 800x300mm surface per shelf accommodates standard gastronorm pans and service ware
- Wall-mount design frees 0.24 square metres of floor area per unit
- Weighs 9.5 kg — requires structural wall fixings rated for combined load
- Stainless steel construction resists corrosion in high-humidity environments
- Open design allows visual inventory checks and promotes air flow
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | WSWB30080 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 9.5 kg (20.9 lbs) |
Construction & Build Quality
Fabricated from commercial-grade stainless steel with welded joints at support brackets. Shelf surfaces are formed from single-piece sheet metal to eliminate crevices. Wall-mounting rails include pre-drilled holes for fastener placement.
- Stainless steel shelves and vertical rails — non-porous surface
- Beveled support brackets welded below each shelf tier
- Adjustable shelf positioning along slotted vertical rails
- Supplied with mounting hardware for solid wall installation
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Turkish-manufactured commercial shelving to the UK, Europe, North America, Middle East, and Africa. Freight is consolidated for multi-unit orders. Documentation includes CE conformity certificates for European health authority compliance.
Frequently Asked Questions
Q: What grade of stainless steel is used in the WSWB30080 shelf?
A: Commercial food-service stainless steel, typically 304 or 430 grade depending on production batch. Both grades meet CE and NSF corrosion-resistance standards for wet kitchen environments.
Q: What is the load capacity per shelf?
A: Each 800x300mm shelf supports approximately 30-40 kg when evenly distributed, subject to correct wall-mounting into structural surfaces. Concentrated loads or inadequate wall fixings reduce capacity.
Q: Can shelf height be adjusted after installation?
A: Yes. Shelves slide along vertical rails and lock at any position using supplied fasteners. Adjustment requires loosening bracket bolts, repositioning, and re-tightening.
Q: Is a splash-back panel available for this model?
A: Standard WSWB30080 ships without rear panel. Custom splash-back fabrication available on request for installations requiring additional wall protection or hygiene barriers.
Q: Can TurcoBazaar supply custom dimensions?
A: Yes. Shelf width, depth, and height can be modified for project-specific layouts. Minimum order quantities apply to non-standard sizes. Lead time extends 3-4 weeks for custom fabrication.