
Ask a Question About This Product
This offer ends in:
The VTC106C is a corner-positioned floor cupboard with hinged door access and 600mm front sides. It integrates into modular worktop layouts where corner space must remain functional for storage or equipment access. Used in commercial kitchens, hotel prep areas, and catering production facilities where floor plans require corner configuration.
Commercial Application
Corner units resolve dead space in L-shaped or U-shaped kitchen layouts. The 600mm front dimension aligns with standard depth worktables and cupboards, allowing continuous runs without gaps. Hinged door access provides reach-in storage for utensils, smallwares, or dry goods during service.
Operators place frequently used items inside to reduce cross-floor movement during prep shifts. The reinforced worktop surface accepts cutting boards, mixers, or plated assembly tasks. Adjustable feet compensate for uneven floors and maintain stable load distribution across the frame.
Key Operational Advantages
- 1000x1000mm footprint with 600mm front sides fits standard modular kitchen runs
- Reinforced stainless steel worktop surface rated for commercial food contact use
- Adjustable feet allow height compensation on uneven commercial floors
- Hinged door provides full-width access to interior storage volume
- Fully stainless steel construction meets CE hygiene standards for food prep environments
- 850mm working height aligns with ergonomic standing prep tasks
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | VTC106C |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
Construction & Build Quality
The VTC106C uses stainless steel throughout the frame, door, and worktop surface. The reinforced top resists deflection under distributed loads from equipment or food assembly tasks. Adjustable feet thread into the base frame for leveling and floor protection.
- Stainless steel construction on all food contact and structural surfaces
- Reinforced worktop capable of supporting commercial prep equipment loads
- Hinged door with stainless steel frame and commercial-grade hardware
- Adjustable feet with floor-protecting base pads
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the VTC106C from UK stock to commercial buyers worldwide. Shipping available to Europe, USA, Canada, Middle East, and Africa. Freight quotations provided for consolidated orders or multi-unit installations.
Frequently Asked Questions
Q: What grade of stainless steel is used in the VTC106C construction?
A: The unit uses food-grade stainless steel throughout. Zodex typically specifies 304-grade stainless for food contact surfaces in CE-certified models. Confirm steel grade with TurcoBazaar if material certification is required for regulatory compliance.
Q: What is the load-bearing capacity of the worktop surface?
A: The reinforced worktop supports typical commercial prep equipment including mixers, slicers, or cutting board assemblies. Distributed load capacity exceeds 50kg across the surface. Avoid concentrated point loads exceeding equipment manufacturer specifications.
Q: Are the adjustable feet and internal shelving included with the unit?
A: Adjustable feet are factory-installed on the base frame. Internal shelving configuration depends on the specific model variant. Contact TurcoBazaar to confirm interior layout and shelf options for the VTC106C.
Q: Can a splashback be added to the rear corner junction?
A: Splashback installation is possible if the unit is positioned against walls requiring splash protection. Custom splashback fabrication may be required for corner geometry. Contact TurcoBazaar for splashback options and mounting hardware.
Q: Is custom sizing available for non-standard corner dimensions?
A: The VTC106C is a standard 1000x1000mm corner unit with 600mm front sides. Custom sizing requires factory consultation and may extend lead times. Contact TurcoBazaar with layout drawings for custom dimension feasibility and pricing.