





Ask a Question About This Product
This offer ends in:
The HEF8L2 is a dual-basket electric fryer with two independent 8-litre oil tanks, rated at 6.5kW total electrical draw on 230V single-phase supply. It processes high-volume fried food batches in takeaway restaurants, fish and chip shops, burger kitchens, and food trucks. Each tank operates independently, allowing simultaneous frying of different products or staggered batch production during continuous service.
Commercial Application
In fast food operations, this unit sits on the frying station countertop and handles continuous batch production throughout service hours. Two separate tanks mean chicken portions can run in one basket while fries cook in the other, eliminating cross-contamination and reducing changeover delays. The 8-litre capacity per tank supports 2-3 kg batch loads depending on product density.
During peak service, operators alternate baskets to maintain output while oil temperature recovers. One tank completes a fry cycle while the second preheats or holds finished product. This configuration maintains throughput in operations serving 80-120 covers per service period.
Key Operational Advantages
- Dual 8-litre tanks deliver 16 litres total oil capacity for extended service periods between filtration cycles
- 6.5kW heating element provides rapid temperature recovery between 3-minute fry cycles
- 230V single-phase connection installs in standard UK commercial kitchen electrical infrastructure
- Independent temperature controls allow different frying temperatures across two tanks simultaneously
- Countertop footprint fits standard prep tables in mobile catering units and compact takeaway kitchens
- 11 kg operational weight permits repositioning during cleaning or layout reconfiguration
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | HEF8L2 |
| Power Output | 6.5kW |
| Voltage | 230V |
| Oil Capacity | 8 litres |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 11.0 kg (24.3 lbs) |
Construction & Build Quality
Tank construction uses stainless steel with welded seams to contain hot oil under repeated thermal cycling. Heating elements mount in protective housings below each tank to prevent direct contact with food debris. Control panel components sit above the splash zone in a sealed compartment.
- Stainless steel oil tanks resist corrosion from acidic cooking oil breakdown products
- Thermostat controls rated for continuous duty in commercial kitchen ambient temperatures up to 40°C
- Drain valves positioned at tank base for complete oil evacuation during filtration procedures
Suitable Operations
- Takeaway restaurants
- Fish and chip shops
- Burger kitchens
- Fast food operations
- Food trucks
- Ghost kitchens
Procurement & Support
TurcoBazaar supplies this Zodex electric fryer from UK warehouse inventory with same-day dispatch to mainland UK addresses. International freight ships to Europe, North America, Middle East, and sub-Saharan Africa through commercial carrier networks. All units carry CE certification meeting UK, EU, NSF, and CSA commercial kitchen safety standards.
Frequently Asked Questions
Q: What are the basket dimensions for each 8-litre tank?
A: Standard fry baskets measure approximately 210mm x 240mm x 100mm deep, accommodating 2-3 kg product loads depending on food density. Baskets nest inside the tank perimeter with handles that rest on the tank rim during frying.
Q: How do I filter and clean the oil in each tank?
A: Each tank has a drain valve at the base for complete oil evacuation into external filtration equipment or disposal containers. Drain both tanks when cold, wipe interior surfaces with food-safe degreaser, rinse thoroughly, and refill with filtered or fresh oil before reheating.
Q: Can this fryer install in a food truck or mobile catering trailer?
A: Yes. The 11 kg weight and countertop design suit mobile installations with secure mounting brackets to prevent movement during transport. Ensure your generator or shore power connection delivers stable 230V at 30A minimum to handle the 6.5kW load.
Q: What electrical supply does the HEF8L2 require?
A: This unit operates on 230V single-phase power at 6.5kW total draw, requiring a dedicated 32A circuit with appropriate RCD protection. Standard UK 13A plug sockets cannot supply this load; hardwired connection or industrial socket outlet is mandatory.
Q: How long does temperature recovery take between batches?
A: Recovery from 150°C to 180°C takes approximately 90-120 seconds after removing a full basket, depending on ambient temperature and oil condition. Alternating between tanks during high-volume service maintains continuous output without extended idle periods.