
Ask a Question About This Product
This offer ends in:
The M804 is a single-pot bain marie warmer holding 4 litres of soup, sauce, or hot topping at stable temperature between 30°C and 80°C. It uses a water-jacketed SS201 stainless steel inner bucket with 400W heating element. Compact footprint (260×260×290mm) suits front-of-house service counters, buffet lines, and back-kitchen holding stations.
Commercial Application
Bain marie warmers solve the operational problem of maintaining consistent food temperature without direct heat that causes scorching or drying. The water-jacket method distributes heat evenly around the 4L insert, holding prepared soups and sauces at safe serving temperature during extended service periods.
Used during lunch and dinner service when prepared sauces or soups must remain ready for plating without reheating. The 170mm diameter round insert with lid fits standard ladle access while minimising heat loss between portions.
Key Operational Advantages
- 4L capacity serves 30-40 portions of 100ml sauce or 20-25 bowls of 150ml soup per fill
- Temperature control dial adjusts holding range from 30°C to 80°C without boiling contents
- 400W heating element reaches working temperature in 15-18 minutes from cold start
- SS201 stainless steel inner bucket resists corrosion from acidic tomato-based sauces and vinegar reductions
- Single-pot configuration reduces counter footprint to 260mm width for tight prep or service zones
- 3.5kg net weight allows portable repositioning during shift changeover or cleaning schedules
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | M804 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 3.5 kg (7.7 lbs) |
Construction & Build Quality
The inner water bucket uses SS201 stainless steel with 0.6mm wall thickness. External housing is powder-coated mild steel with heat-resistant finish. The heating element sits below the water chamber and connects to a mechanical thermostat dial with calibrated temperature markings.
- SS201 stainless steel inner bucket rated for continuous water contact at 80°C maximum
- Powder-coated steel exterior withstands commercial kitchen humidity and cleaning agents
- Mechanical thermostat dial provides tactile temperature adjustment without electronic failure points
- Round insert includes stainless steel lid with recessed grip handle for single-hand operation
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial bain marie warmers from UK warehouse stock to buyers in United Kingdom, Europe, United States, Canada, Middle East, and Sub-Saharan Africa. The M804 ships as a single 5kg carton with insert, lid, and mains cable included. Freight charges for multi-unit orders are calculated by destination zone and carrier service level.
Frequently Asked Questions
Q: What grade of stainless steel is used in the M804 inner bucket?
A: The inner water bucket uses SS201 stainless steel. This grade provides corrosion resistance for water-jacketed applications and resists staining from acidic food contact. The insert is also SS201 with 0.5mm wall thickness.
Q: Can the M804 hold temperature for an 8-hour service shift without refilling water?
A: Water capacity in the jacket chamber supports 6-8 hours of continuous operation at 60-70°C setting before requiring top-up. Evaporation rate increases at higher thermostat settings. Visual water-level inspection through the gap between insert and housing rim indicates when refill is needed.
Q: Does the unit include adjustable legs for uneven counter surfaces?
A: The M804 has fixed rubber feet without height adjustment. For uneven surfaces, place the unit on a stable stainless steel work table or use levelling shims under the base.
Q: What is the maximum safe load capacity of the single insert?
A: The 4L insert holds 4kg of liquid content at maximum fill line marked 20mm below rim. Thicker preparations such as curry or chilli reduce usable volume to 3.5L due to surface tension and ladling clearance requirements.
Q: Can additional inserts or custom sizes be ordered separately?
A: Replacement 170mm diameter inserts are available from TurcoBazaar spare parts inventory. Custom-diameter inserts are not offered due to water-jacket clearance tolerances. The M804 accepts only the supplied round insert specification.