Black Decorative Cast Iron Table base 520mm Standard height | TurcoBazaar A083

Black Decorative Cast Iron Table base 520mm Standard height | TurcoBazaar A083
Black Decorative Cast Iron Table base 520mm Standard height | TurcoBazaar A083
Black Decorative Cast Iron Table base 520mm Standard height | TurcoBazaar A083
Black Decorative Cast Iron Table base 520mm Standard height | TurcoBazaar A083
Black Decorative Cast Iron Table base 520mm Standard height | TurcoBazaar A083
This offer ends in:
Days
Hours
Min
Sec
from Save -63%
£50.40
£136.80
Ex Tax: £50.40
  • Brand: Zodex
  • Model: A083
  • SKU: A083
Sold: 8
Views: 970
UK-Based Supplier
Worldwide Shipping
Technical Support
Spare Parts & After-Sales

The A083 is a cast iron table base used in restaurants, cafés, and hotels to support dining tables in front-of-house and outdoor service areas. Weighing 13 kg with a 520 mm footprint, it anchors tables up to 450 mm diameter at standard 720 mm height. Operators use it where heavy-duty stability is required for medium-traffic dining zones.

Commercial Application

Cast iron bases solve the problem of table movement during service. In bistros and outdoor terraces, wind and patron contact displace lighter bases. This unit stays anchored without additional ballast.

The 520 mm width distributes weight across café and restaurant floors without concentrated load. A single operator can position the base during setup. The 720 mm height matches standard dining chair ergonomics.

Key Operational Advantages

  • Cast iron construction: 13 kg mass provides passive stability
  • 520 x 520 mm base footprint: supports tabletops up to 450 mm diameter
  • 720 mm standard dining height: compatible with 450 mm seat chairs
  • Black sand finish: hides surface wear in high-traffic outdoor zones
  • Single-piece casting: no welds or joints to fail under daily repositioning

Technical Specifications

SpecificationDetails
Model / SKUA083
CertificationMeets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements.
Weight13.0 kg (28.7 lbs)

Construction & Build Quality

The base is cast in one piece from ferrous metal with black sand coating applied after cooling. No welded joints means the structure tolerates repeated movement without fracture. The ornate profile is formed in the mold, not machined afterward.

  • Single-pour cast iron: eliminates weld points common in fabricated bases
  • Black sand finish: baked-on coating resists chipping during transport
  • 520 mm square footprint: distributes 13 kg across commercial floor surfaces

Suitable Operations

  • Restaurants
  • Hotels
  • Catering businesses
  • Food trucks
  • Commercial kitchens

Procurement & Support

TurcoBazaar supplies the A083 from UK inventory to restaurants and hotels in Europe, North America, Middle East, and Africa. Standard lead time is 1–3 working days for UK delivery. Export shipments require freight quotation based on destination and quantity.

Worldwide ShippingUK, Europe, USA, Canada, Middle East, Africa
📦
Freight QuotationAvailable for larger or heavy units
💬
WhatsApp SupportTechnical guidance before ordering
🔧
Spare PartsAfter-sales support available
Need help choosing the correct model?Contact TurcoBazaar for technical guidance on base-to-tabletop sizing or freight quotation for multiple units. WhatsApp inquiries receive same-day response during UK business hours.
Contact Our Team

Frequently Asked Questions

Q: Is this table base suitable for commercial outdoor use?

A: Yes. The 13 kg cast iron mass and black sand finish handle outdoor terraces and pavement dining areas. The coating resists moisture but requires annual inspection for rust at the bottom plate.

Q: What tabletop size does the A083 support?

A: The 520 mm base supports tabletops up to 450 mm diameter or 600 mm square. Larger tops require wider bases to prevent tip risk during service.

Q: Do you ship cast iron table bases worldwide?

A: TurcoBazaar ships to UK, Europe, USA, Canada, Middle East, and Africa. Single units ship via courier. Orders of 10+ bases require pallet freight with quotation based on destination.

Q: What after-sales support is available for this product?

A: Technical guidance covers tabletop mounting and floor protection. Cast iron bases do not require spare parts. Coating touch-up specifications available on request.

Q: Can I order replacement parts for the A083 base?

A: No consumable parts exist on cast iron bases. Structural damage requires full unit replacement. Volume buyers receive priority allocation during restock cycles.

Write a review

Note: HTML is not translated!
Rating
Bad Good
Ships worldwide 🇺🇸 USA 🇨🇦 Canada 🇪🇺 EU 🇸🇦 Middle East 🌍 Africa Shipping cost shown at checkout — before payment
Dispatch & delivery
Ready in ~3 weeks
Made to order in Turkey. Express international shipping.
FedEx Express DHL Express
Safety & compliance
CE NSF CSA Health & Safety
Certified for UK · EU · USA · Canada
Supplier
UK-based
Dispatched from the UK. Direct manufacturer relationship. Spare parts & after-sales support available.
Accepted payment methods
Credit / Debit card Bank transfer Extra discount Cryptocurrency Extra discount

Freight cost is calculated at checkout — you'll see the exact total including shipping before any payment is taken. Not sure if we deliver to your country or need a freight quote first? Message us on WhatsApp — we reply within a few hours.

Important Information for Commercial Buyers

Worldwide Commercial Shipping

TurcoBazaar is a UK-based commercial kitchen equipment supplier serving the UK, Europe, the USA, Canada, and many international destinations. We regularly support restaurants, hotels, takeaways, food trucks, catering companies, cafés, and commercial kitchens with international equipment supply.

Professional Commercial Use

Our products are designed for professional foodservice and commercial kitchen environments. Depending on the model, equipment is suitable for restaurants, ghost kitchens, hotel kitchens, bakeries, takeaways, catering businesses, and mobile catering operations.

Gas and Electrical Options

Depending on the product, equipment may be available in LPG, Natural Gas, 110V, 220V, or 380V configurations. Available options can often be selected directly on the product page, or confirmed with our team before ordering.

Product Standards and Documentation

Many products are CE certified and manufactured for professional commercial use. For selected models, we may also be able to provide technical documentation to support local commercial checks where required.

After-Sales Support

TurcoBazaar provides professional after-sales support, technical guidance, and spare parts support for commercial customers worldwide. Our aim is to help businesses choose suitable equipment and keep it working reliably over the long term.

Need a Shipping Review?

If shipping costs appear high at checkout, contact our team directly. In many cases we can review the destination, product size, and freight options to see whether a more suitable shipping solution can be offered.