Stainless Steel Work Table Bottom Shelf 1300x700x900mm | TurcoBazaar ETW13070

Stainless Steel Work Table Bottom Shelf 1300x700x900mm | TurcoBazaar ETW13070
Stainless Steel Work Table Bottom Shelf 1300x700x900mm | TurcoBazaar ETW13070
This offer ends in:
Days
Hours
Min
Sec
from Save -59%
£138.00
£338.40
Ex Tax: £138.00
  • Brand: Zodex
  • Model: ETW13070
  • SKU: ETW13070
Sold: 0
Views: 1084
UK-Based Supplier
Worldwide Shipping
Technical Support
Spare Parts & After-Sales

The ETW13070 is a flatpack stainless steel work table with a 1300×700 mm top surface and 900 mm working height. It provides a food-safe preparation area for commercial kitchens, hotel prep zones, and catering production lines. The unit ships disassembled and includes a galvanised undershelf for storage or equipment placement.

Commercial Application

Kitchen managers install this table where hygiene compliance and rapid cleaning cycles are required. The non-porous steel top prevents bacterial retention during repetitive food contact tasks. The galvanised lower shelf holds dry goods, utensils, or small equipment beneath the primary work zone.

During service, operators use the surface for plating, vegetable prep, or assembly work that requires frequent sanitisation. The 700 mm depth accommodates cutting boards and mixing bowls without crowding the workspace. Plastic bullet feet allow minor levelling adjustments on uneven floor surfaces.

Key Operational Advantages

  • 1300×700 mm top surface in 201 stainless steel
  • Galvanised undershelf with hat channel bracing for structural rigidity
  • 900 mm working height suits standing prep tasks without operator fatigue
  • 18 kg flatpack weight simplifies freight and site access in narrow doorways
  • Plastic bullet feet provide 10–15 mm height adjustment for floor irregularities
  • CE certified for UK and EU food contact compliance; NSF and CSA equivalent standards met

Technical Specifications

SpecificationDetails
Model / SKUETW13070
CertificationMeets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements.
Weight18.0 kg (39.7 lbs)

Construction & Build Quality

The top shelf is 1.0 mm grade 201 stainless steel, welded at the corners and edges for rigidity. Galvanised mild steel legs connect to stamped sockets with fasteners supplied in the flatpack kit. The undershelf is galvanised steel with hat channel reinforcement to prevent sagging under distributed loads.

  • 1.0 mm 201 stainless steel top — corrosion-resistant, non-porous food contact surface
  • Galvanised legs and undershelf resist oxidation in humid kitchen environments
  • Hat channel undershelf support distributes weight across the frame
  • Flatpack assembly with socket joints — no welding required on site

Suitable Operations

  • Commercial kitchens
  • Hotel prep areas
  • Restaurant kitchens
  • Catering production facilities
  • Food processing operations

Procurement & Support

TurcoBazaar supplies Zodex commercial furniture from UK stock to buyers in Europe, the USA, Canada, the Middle East, and Africa. Lead time for the ETW13070 is typically 1–3 working days for UK mainland delivery. Export orders require freight quotation based on destination and pallet count.

Worldwide ShippingUK, Europe, USA, Canada, Middle East, Africa
📦
Freight QuotationAvailable for larger or heavy units
💬
WhatsApp SupportTechnical guidance before ordering
🔧
Spare PartsAfter-sales support available
Need help choosing the correct model?Contact TurcoBazaar for material certificates, assembly instructions, or freight quotation on multi-unit orders. WhatsApp is available for rapid technical clarification during procurement cycles.
Contact Our Team

Frequently Asked Questions

Q: Is the top shelf 304 or 430 grade stainless steel?

A: The ETW13070 uses 201 grade stainless steel for the top surface. This grade meets food contact hygiene standards and resists corrosion in typical commercial kitchen conditions. Buyers requiring 304 or 316 grade for corrosive or marine environments should request custom specifications.

Q: What is the maximum evenly distributed load capacity for the top shelf?

A: The manufacturer rates the top shelf for 80 kg evenly distributed static load. Concentrated point loads above 20 kg may cause localised deformation. The galvanised undershelf supports up to 40 kg when weight is spread across the full shelf area.

Q: Are the legs adjustable in height or fixed?

A: The plastic bullet feet allow 10–15 mm height adjustment to compensate for floor irregularities. Leg length is fixed at 900 mm from floor to underside of the top shelf. Custom leg heights require factory modification and extended lead times.

Q: Can a splashback or upstand be added to the rear edge?

A: The ETW13070 ships without a splashback. Buyers requiring a rear upstand for wall-mounted installations can request aftermarket fabrication or specify the upstand option when ordering. Splashbacks typically add 100–150 mm to the rear height.

Q: Is custom sizing available for narrower or wider kitchen layouts?

A: Zodex manufactures work tables in modular widths from 600 mm to 2000 mm and depths from 600 mm to 800 mm. Custom dimensions require factory quotation and 3–4 week lead times. Buyers should provide floor plans and clearance measurements when requesting non-standard sizes.

Write a review

Note: HTML is not translated!
Rating
Bad Good

Important Information for Commercial Buyers

Worldwide Commercial Shipping

TurcoBazaar is a UK-based commercial kitchen equipment supplier serving the UK, Europe, the USA, Canada, and many international destinations. We regularly support restaurants, hotels, takeaways, food trucks, catering companies, cafés, and commercial kitchens with international equipment supply.

Professional Commercial Use

Our products are designed for professional foodservice and commercial kitchen environments. Depending on the model, equipment is suitable for restaurants, ghost kitchens, hotel kitchens, bakeries, takeaways, catering businesses, and mobile catering operations.

Gas and Electrical Options

Depending on the product, equipment may be available in LPG, Natural Gas, 110V, 220V, or 380V configurations. Available options can often be selected directly on the product page, or confirmed with our team before ordering.

Product Standards and Documentation

Many products are CE certified and manufactured for professional commercial use. For selected models, we may also be able to provide technical documentation to support local commercial checks where required.

After-Sales Support

TurcoBazaar provides professional after-sales support, technical guidance, and spare parts support for commercial customers worldwide. Our aim is to help businesses choose suitable equipment and keep it working reliably over the long term.

Need a Shipping Review?

If shipping costs appear high at checkout, contact our team directly. In many cases we can review the destination, product size, and freight options to see whether a more suitable shipping solution can be offered.