



Ask a Question About This Product
This offer ends in:
The ADR183612 is a welded aluminium dunnage rack rated for 750 kg static load across 915×460×300mm footprint. It keeps bulk ingredients, sacks, and boxed goods raised above floor level in walk-in coolers, dry stores, or front-of-house areas. Used in restaurant back-of-house, hotel kitchens, and catering prep zones where hygiene regulations require off-floor storage.
Commercial Application
Dunnage racks solve the operational problem of floor contact during storage. Health inspectors in UK, EU, USA, and Canada require minimum 150mm clearance beneath stored food. This rack provides 300mm height, allowing mop access and preventing rodent harbouring.
Operators use these racks in walk-in refrigerators for 25kg flour sacks, in dry stores for bulk rice and potato bags, and in preparation areas for boxed produce. The 750 kg capacity means 30 bags of 25kg flour can sit on one rack without deformation. Aluminium construction tolerates the humidity inside cold rooms without rust.
Key Operational Advantages
- 750 kg static load capacity across welded tubular aluminium frame
- 915×460mm deck raises goods 300mm above floor — exceeds 150mm hygiene requirement
- Weighs 16 kg — one person can reposition the rack during cleaning
- Welded joints throughout — no bolt failure under cyclic loading
- Aluminium does not rust in refrigerated environments below 4°C
- 300mm clearance allows standard commercial mop head to pass beneath
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | ADR183612 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 16.0 kg (35.3 lbs) |
Construction & Build Quality
Frame is tubular welded aluminium with TIG-welded corner joints. Deck slats are extruded aluminium sections spaced to support sack bases without puncture. All welds are ground smooth to prevent fabric tears on stored goods.
- Tubular aluminium frame — corrosion-resistant in humid environments
- TIG-welded joints — no mechanical fasteners to loosen under load
- Ground weld beads — smooth contact surface for bagged goods
- 16 kg unit weight — relocatable by single operator
Suitable Operations
- Restaurants
- Hotels
- Catering businesses
- Food trucks
- Commercial kitchens
Procurement & Support
TurcoBazaar supplies Zodex commercial storage equipment from UK warehouse to buyers in Europe, USA, Canada, Middle East, and Africa. Standard carriage applies to UK mainland orders. Export orders ship via freight forwarder with customs documentation provided.
Frequently Asked Questions
Q: Does this rack meet UK and EU food hygiene requirements?
A: Yes. CE certified construction and 300mm floor clearance exceed the 150mm minimum specified in UK Food Hygiene Regulations and EU 852/2004. Aluminium is approved for food contact zones.
Q: Can I use this rack inside a walk-in refrigerator?
A: Yes. Aluminium construction resists corrosion in refrigerated environments down to -10°C. The welded frame does not harbour moisture that causes steel rust.
Q: Do you ship this rack to USA and Canada?
A: Yes. TurcoBazaar ships worldwide including USA and Canada. Freight cost depends on destination and quantity. Customs documentation provided for North American orders.
Q: Are replacement parts available if a deck slat bends?
A: Yes. Replacement deck slats ship from UK stock. Contact after-sales team with rack model number and photograph of damaged section.
Q: How many racks do I need for a 3-metre walk-in cooler?
A: Depends on stored volume. Each rack occupies 915×460mm floor space and holds 750 kg. Contact technical team with cooler dimensions and typical stock levels for layout recommendation.