



Ask a Question About This Product
This offer ends in:
The DCR002A050 roasts up to 500g of green coffee beans per batch using a 1000W carbon heating tube and programmable cycle control. It runs on single-phase 220V supply and offers nine automatic roast profiles plus manual override for batch-to-batch consistency. Operations include specialty coffee shops, hotel breakfast stations, and catering services requiring fresh-roasted beans on-site.
Commercial Application
Green coffee beans are loaded into the drum, which rotates continuously during the heating cycle. The viewing window allows operators to monitor bean colour development without interrupting airflow. The activated carbon filter removes smoke particulates before exhaust, reducing odour in front-of-house areas.
Batch roasting takes place between service periods or during prep shifts. A 500g capacity yields approximately 60–70 espresso shots after grinding and portioning. Operators can repeat the same programme number for multiple batches or switch to manual mode to adjust time and temperature mid-cycle.
Key Operational Advantages
- 500g maximum capacity, 350–400g optimal load for even heat distribution
- 1000W carbon heating tube with nine pre-programmed roast profiles
- Manual override available during automatic cycles for real-time adjustment
- Stainless steel drum and body withstand continuous daily operation
- Viewing window permits visual monitoring without opening the chamber
- Activated carbon filter captures smoke and volatile compounds during exhaust
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | DCR002A050 |
| Power Output | 1000W |
| Voltage | 220V |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
Construction & Build Quality
The body is stainless steel with a rotating drum that tumbles beans throughout the roast cycle. The carbon heating tube sits below the drum and delivers radiant heat evenly across the batch. The activated carbon filter measures 215 × 194 × 29 mm and is replaceable when throughput declines.
- Stainless steel drum and external housing
- Carbon heating tube rated at 1000W continuous output
- Replaceable activated carbon filter (215 × 194 × 29 mm)
- Viewing window constructed from heat-resistant glass
Suitable Operations
- Coffee shops
- Hotel breakfast services
- Restaurants
- Office canteens
- Catering businesses
Procurement & Support
TurcoBazaar supplies the DCR002A050 from UK stock with delivery to commercial buyers across the United Kingdom, Europe, North America, the Middle East, and Africa. All units ship with CE certification documentation and a 12-month spare parts warranty. Freight quotations are provided for international orders before dispatch.
Frequently Asked Questions
Q: What batch size delivers the most consistent roast?
A: Load 350–400g of green beans for optimal heat distribution. The 500g maximum capacity can be used but may result in longer roast times and uneven colour development. Smaller batches roast faster but require closer monitoring.
Q: How many roast profiles are pre-programmed?
A: Nine automatic programmes cover light, medium, and dark roast levels with variations in ramp rate and soak time. Operators can also switch to manual mode mid-cycle to extend or reduce roast duration. Programme settings are retained after power cycling.
Q: How often does the activated carbon filter need replacement?
A: Filter lifespan depends on batch frequency and bean moisture content. Typical replacement occurs after 200–300 roast cycles or when visible smoke escapes during operation. Replacement filters are available from TurcoBazaar UK stock.
Q: Can the heating tube be serviced or replaced?
A: The carbon heating tube is a replaceable component rated for approximately 2000 operating hours. Access requires removal of the drum assembly and base panel. TurcoBazaar supplies replacement tubes with installation instructions.
Q: What warranty coverage applies to commercial installations?
A: A 12-month spare parts warranty covers manufacturing defects in the drum motor, heating element, and control board. Wear items such as filters and seals are excluded. Warranty claims require proof of purchase and installation in a ventilated commercial environment.