





Ask a Question About This Product
This offer ends in:
- Stock: In Stock
- Model: GS65VBLACKWOODSEATWALNUTBACK
- SKU: GS65VBLACKWOODSEATWALNUTBACK
The GS65VBLACKWOODSEATWALNUTBACK is a black steel frame dining chair with black wood seat and antique walnut back panel. It weighs 3.5 kg per unit and ships flat-pack or pre-assembled depending on order volume. Restaurants, hotels, and contract catering operations use it in dining areas requiring durable, stackable seating.
Commercial Application
The powder-coated steel frame resists corrosion in commercial dining environments. The black wood seat and walnut back panel provide a dual-finish aesthetic for venues specifying mixed-material furniture. Seat height is 495 mm, suitable for standard 750 mm dining tables.
The contoured backrest maintains guest posture during extended dining service. The unit stacks for storage between service periods or event reconfiguration. Total height of 830 mm allows clearance under most commercial table aprons.
Key Operational Advantages
- Powder-coated steel frame rated for commercial use in restaurants and hotels
- Seat height 495 mm, width 440 mm, depth 485 mm — compatible with 750 mm tables
- Weight 3.5 kg per unit — portable for event setup and daily floor reconfiguration
- Black wood seat with antique walnut back — dual finish without upholstery maintenance
- Stackable design reduces storage footprint between service periods
- CE certified for UK and EU commercial furniture standards
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | GS65VBLACKWOODSEATWALNUTBACK |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 3.5 kg (7.7 lbs) |
Construction & Build Quality
The frame uses powder-coated steel tubing welded at stress points. The seat and back are solid wood components finished separately before assembly. All fixings are steel with corrosion-resistant coating.
- Powder-coated steel frame with welded joints at leg-to-seat connection points
- Black wood seat panel 440 mm wide — solid construction, no veneer
- Antique walnut back panel — contrasting finish sealed for commercial wipe-down
- Steel fixings throughout — no plastic clips or snap-fit components
Suitable Operations
- Nut processing farms
- Confectionery ingredient workshops
- Artisanal food producers
- Specialty bakeries
- Commercial food prep kitchens
Procurement & Support
TurcoBazaar supplies this model to UK, European, USA, Canadian, Middle Eastern, and African commercial buyers. Bulk orders for hotels, restaurant groups, and contract caterers ship on pallet with volume pricing. Freight quotation provided for orders above 50 units.
Frequently Asked Questions
Q: What is the maximum safe stacking height for storage?
A: Stack up to 8 units high on level flooring. Exceeding 8 chairs per stack increases risk of frame contact damage. Use dolly or trolley for stacked transport across uneven surfaces.
Q: Can the wood components be refinished on site?
A: Yes. Sand lightly and apply commercial wood sealer or lacquer. Allow 24 hours cure time before returning to service. Do not use solvent-based finishes near powder-coated steel.
Q: Is assembly required on delivery?
A: Chairs ship pre-assembled for orders under 50 units. Bulk orders may ship flat-pack with bolt-together assembly to reduce freight volume. Assembly time is approximately 4 minutes per chair.
Q: What is the weight limit per seat?
A: The frame is rated for 120 kg static load under CE commercial furniture testing. Exceeding this load voids warranty and may cause weld failure at leg joints.
Q: Are replacement frames available separately from wood components?
A: Yes. Frames, seat panels, and back panels sold as individual spare parts. Order by model number with component suffix. Lead time for spare frames is 2–3 weeks from Turkey.