
Ask a Question About This Product
This offer ends in:
The VC125S is a full-height stainless steel storage cabinet with four sliding doors, measuring 1200x500x1800mm. It provides enclosed storage for dry goods, utensils, cleaning supplies, and non-refrigerated inventory in commercial kitchens and food preparation areas. Sliding doors reduce aisle clearance requirements in tight service zones.
Commercial Application
Enclosed storage prevents dust accumulation and cross-contamination in active kitchen environments. The cabinet consolidates bulk dry goods, single-use items, and cleaning chemicals in one secure location. Four sliding doors allow simultaneous access by multiple staff during service prep without door swing interference.
Operators use the unit during mise en place to stage portion-controlled ingredients and during breakdown to secure cleaning supplies away from food contact surfaces. The 1800mm height maximizes vertical storage in facilities with standard ceiling clearances. Three adjustable shelves accommodate variable container heights from 5kg flour bags to stacked storage bins.
Key Operational Advantages
- 1200mm width spans two standard kitchen module positions
- 500mm depth fits against wall runs without obstructing walkways
- Four sliding doors eliminate 600mm door swing clearance requirement
- Three adjustable shelves reconfigure for changing inventory profiles
- 201 stainless steel resists corrosion in high-humidity prep environments
- 0.8mm gauge construction balances load capacity with cabinet weight
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | VC125S |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
Construction & Build Quality
The cabinet uses 201 stainless steel throughout with 0.8mm material thickness. This grade provides adequate corrosion resistance for dry storage applications at lower cost than 304 stainless. Sliding door tracks are recessed to prevent debris accumulation.
- 201 stainless steel construction — suitable for dry storage zones
- 0.8mm gauge provides structural rigidity for shelf loads
- Recessed sliding tracks reduce cleaning maintenance
- Welded corner joints prevent moisture ingress
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the VC125S from UK inventory to commercial kitchens across the UK, Europe, USA, Canada, Middle East, and Africa. The unit ships assembled via freight carrier for installations requiring immediate deployment. CE certification confirms compliance with UK and EU commercial kitchen equipment standards.
Frequently Asked Questions
Q: Is this 304 or 201 stainless steel?
A: The VC125S uses 201 grade stainless steel. This specification suits dry storage applications where direct food contact does not occur. For wet prep zones or direct food contact surfaces, specify 304 grade alternatives.
Q: What is the load capacity per shelf?
A: Each shelf supports approximately 30kg when evenly distributed. Total cabinet load should not exceed 90kg across three shelves. Concentrate heavy items on lower shelves to maintain stability.
Q: Are the shelves adjustable?
A: Three shelves adjust on 50mm increments via recessed bracket slots. This allows configuration for tall equipment on bottom shelves and smaller containers above. Remove shelves entirely if storing floor-standing mixers or large stockpots.
Q: Does the cabinet include a splashback?
A: The VC125S has no integrated splashback. Mount the unit against tiled walls or specify separate splashback panels when installing near sinks or prep stations with wet processes.
Q: Can I order custom dimensions?
A: Zodex produces custom widths in 100mm increments from 800mm to 2000mm with 4-6 week lead time. Depth and height remain fixed at 500mm and 1800mm. Minimum order quantities apply for non-standard sizing.