





Ask a Question About This Product
This offer ends in:
The VS187LBT is a dual-bowl stainless steel sink unit with integrated bottom shelf and splashback, built for commercial kitchens requiring dedicated wash zones. It spans 1800mm width by 700mm depth, with two 500mm × 400mm × 250mm bowls positioned left. The unit weighs 59 kg assembled and ships CE-certified for food contact compliance.
Commercial Application
Kitchen managers install this unit where separate wash and rinse zones are required under health department protocols. The left-bowl configuration allows right-side prep space or adjacency to existing dish zones. Bottom shelf carries detergent dispensers, spare spray heads, or sanitiser bottles within operator reach.
During service, line cooks use the dual-bowl layout to segregate vegetable wash from utensil soak operations. The 250mm bowl depth accommodates stock pots and roasting pans without overflow. Splashback height prevents wall saturation in high-volume wash cycles.
Key Operational Advantages
- 1800mm width provides two 500mm bowls plus surrounding workspace
- 304 AISI stainless steel worktop and 40×40mm square legs — no galvanised components
- Adjustable feet compensate for uneven commercial kitchen floors
- Bottom shelf constructed in stainless steel with upturned edges to contain spillage
- Scotch Brite finish reduces visible water marks and fingerprints during shift operation
- 59 kg weight indicates welded construction suitable for fixed installation
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | VS187LBT |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 59.0 kg (130.1 lbs) |
Construction & Build Quality
Worktop, bowls, legs, and shelf are fabricated from 304 AISI stainless steel. Square 40×40mm legs terminate in adjustable feet for levelling. Under-panel and upturned shelf edges prevent drip migration to floor surfaces.
- 304 grade stainless steel across all wetted and structural surfaces
- Scotch Brite finish standard on worktop and bowls
- Welded splashback integral to rear edge
- Adjustable feet with locking threads for permanent levelling
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the VS187LBT directly from Zodex manufacturing in Turkey to commercial buyers in the UK, Europe, USA, Canada, Middle East, and Africa. All units ship with CE certification documentation. Freight quotations account for unit weight and destination port or depot.
Frequently Asked Questions
Q: Is the worktop 304 or 430 grade stainless steel?
A: The worktop, bowls, and legs are 304 AISI grade. No galvanised or 430 grade components are used in wetted zones.
Q: What is the load capacity of the bottom shelf?
A: The shelf is constructed for typical detergent container and cleaning supply storage. Concentrated loads exceeding 25 kg should be distributed across shelf length.
Q: Are the legs adjustable for uneven floors?
A: Yes. Each 40×40mm square leg terminates in an adjustable foot with locking thread for permanent levelling once positioned.
Q: Does the splashback come welded or bolted?
A: The splashback is integral to the rear worktop edge, welded during fabrication. No field assembly or sealant application is required.
Q: Can this unit be ordered in custom widths or bowl positions?
A: Zodex manufactures this model in standard 1800mm width with left bowl configuration. Custom sizing requires minimum order quantity and extended lead time — contact for feasibility.