











Ask a Question About This Product
This offer ends in:
The QNH608 is a single-bowl pot wash sink built for manual cleaning of large cookware in commercial kitchens. Dimensions are 1200x600x850mm. Weight is 13.8 kg, supplied flat-packed for on-site assembly.
Commercial Application
Installed in dishwashing areas and pot wash stations where automated warewashers cannot handle oversized pans, stock pots, and baking trays. The deep bowl accommodates large-volume cookware used in hotels, restaurants, and catering operations.
Used throughout service periods for immediate cleaning of bulky items that block automated dish lines. The 1200mm width handles commercial sheet pans and roasting trays without repositioning.
Key Operational Advantages
- 1200x600x850mm single bowl with integrated splashback
- Stainless steel construction — 13.8 kg net weight
- Open-frame undershelf for detergent storage and drainage
- Flat-packed assembly reduces freight volume
- CE certified for UK and EU commercial hygiene standards
- NSF and CSA compliant for North American installations
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | QNH608 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 13.8 kg (30.4 lbs) |
Construction & Build Quality
Constructed from food-grade stainless steel with welded joints and reinforced undershelf bracing. The rear splashback is integrated into the bowl structure to prevent wall saturation. Frame design allows drainage access and cleaning chemical storage below the basin.
- Full stainless steel body and bowl — corrosion-resistant in wet environments
- Welded splashback prevents wall damage from high-volume rinsing
- Reinforced open-frame design with undershelf bracing
- Flat-pack delivery — assembled on-site with standard tools
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the QNH608 from UK inventory with shipping to Europe, North America, Middle East, and Africa. Zodex manufacture ensures consistent commercial-grade fabrication. Freight quotations provided for multi-unit orders.
Frequently Asked Questions
Q: What grade of stainless steel is used in the QNH608?
A: The QNH608 uses food-grade stainless steel suitable for wet commercial environments. Zodex typically fabricates pot wash units from 430-grade stainless steel for corrosion resistance. Confirm exact grade specification at point of order if 304-grade is required.
Q: What is the load-bearing capacity of the undershelf?
A: The open-frame undershelf is designed for storage of cleaning chemicals and small utensils, not heavy cookware. Recommended maximum distributed load is 15 kg. The primary basin structure supports typical manual pot washing loads.
Q: Are the legs height-adjustable?
A: The QNH608 is supplied at fixed 850mm working height. Adjustable bullet feet can be specified at time of order for uneven floor conditions. Contact before purchase if custom leg heights are required.
Q: Can the splashback height be customised?
A: The integrated splashback is fabricated at standard height for wall protection during manual rinsing. Custom splashback dimensions require factory specification and may affect lead time. Discuss requirements with TurcoBazaar before ordering.
Q: Is custom sizing available for tighter kitchen layouts?
A: Zodex can fabricate pot wash sinks to non-standard dimensions for specific installation constraints. Custom orders require engineering drawings and longer production lead times. Minimum order quantities may apply for bespoke sizing.