





Ask a Question About This Product
This offer ends in:
The QNH302 is a 1200x600x850mm stainless steel work table with enclosed sliding-door storage and mid-level shelf. It provides 0.72m² of food-contact work surface at 850mm working height with internal storage compartment accessible via dual sliding doors. Operates in commercial kitchens, hotel prep areas, catering facilities, and food processing operations where hygienic surface preparation and organised tool storage are required.
Commercial Application
The unit functions as a prep station with contained storage below the work surface. Sliding doors provide access to internal compartments without swing clearance requirements. Mid-shelf divides storage into two zones for ingredient staging, utensil organisation, or equipment placement during service preparation.
The 850mm height suits standing operators during extended prep shifts. The 600mm depth accommodates cutting boards, mixing bowls, and plating operations without reaching strain. Enclosed storage keeps tools and containers out of sight during health inspections while maintaining access during prep sequences.
Key Operational Advantages
- 0.72m² work surface at 1200x600mm dimensions with 850mm working height
- Dual sliding doors eliminate swing clearance requirements in narrow prep corridors
- Internal mid-shelf at 295mm creates two storage zones totalling 560mm vertical space
- 150mm adjustable feet compensate for uneven floor surfaces in older commercial buildings
- 40.54kg weight allows two-person relocation without mechanical assistance
- Stainless steel construction meets CE hygiene standards for direct food contact surfaces
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | QNH302 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 40.54 kg (89.4 lbs) |
Construction & Build Quality
The work surface, cabinet panels, and doors are fabricated from stainless steel. The top bench features 50mm edge reinforcement to resist deflection under load. Internal shelf and cabinet floor provide structural rigidity and prevent panel flex during door operation.
- Stainless steel panels throughout cabinet structure and work surface
- 50mm reinforced edge band on work surface perimeter
- 150mm height-adjustable feet with base levelling capacity
- Flat-pack assembly reduces freight volume and allows on-site configuration
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the Zodex QNH302 from UK warehousing to commercial buyers in the United Kingdom, Europe, North America, Middle East, and Africa. Standard freight applies to single-unit orders. Multiple units qualify for pallet consolidation and freight quotation based on destination postal code and delivery access constraints.
Frequently Asked Questions
Q: What grade of stainless steel is used in the QNH302 construction?
A: Contact TurcoBazaar technical team to confirm steel grade specification (304 or 430) for the work surface and cabinet panels. Steel grade affects corrosion resistance in high-chloride environments and compliance with specific health authority requirements. Grade confirmation is provided prior to order processing.
Q: What is the maximum load-bearing capacity of the work surface?
A: The 50mm reinforced edge band provides structural support for typical prep equipment and ingredient loads. Contact technical team for verified load capacity data if placement of heavy machinery (mixers, slicers over 30kg) is planned. Uniform load distribution across the surface is recommended.
Q: Are the feet adjustable for uneven floor surfaces?
A: The 150mm feet include height adjustment mechanisms to compensate for floor irregularities. Total adjustment range should be confirmed with technical team based on floor gradient measurements. All four feet must maintain floor contact under loaded conditions.
Q: Can a splash-back be added to the rear or sides?
A: The QNH302 ships without integrated splash-back panels. Aftermarket splash-backs or wall-mounted panels can be field-installed if required by local health codes. Contact TurcoBazaar for compatible splash-back component sourcing.
Q: Is custom sizing available for non-standard kitchen layouts?
A: The QNH302 is supplied in 1200x600x850mm dimensions as standard production configuration. Custom width, depth, or height modifications require factory quotation with minimum order quantities. Lead time for custom sizing extends 4-6 weeks beyond standard delivery.