





Ask a Question About This Product
This offer ends in:
The THATS156 is a 1500×600×900 mm stainless steel work table with integrated bottom shelf. It provides food-safe preparation surface in commercial kitchens, hotel prep zones, and catering production lines. Adjustable height and 40 kg construction suit medium to high-volume operations.
Commercial Application
Work tables anchor prep workflows in multi-station kitchens. Surface dimensions accommodate portioned ingredient trays, plated assembly, and cutting board staging. The bottom shelf holds backup stock or equipment within arm's reach during service.
Used during mise en place and continuous prep cycles. Staff stand at adjustable 850–900 mm height for ergonomic cutting and assembly. The 1500 mm length supports two-person side-by-side work on high-turnover shifts.
Key Operational Advantages
- 201 AISI stainless steel top and frame — non-porous, cleanable with standard sanitizers
- 500 kg rated load capacity — supports heavy mixers, full ingredient bins, or stacked trays
- 40×40 mm square tube legs with adjustable feet — compensates for uneven floor surfaces
- Double-walled reinforced worktop at 60 mm depth — resists deflection under concentrated loads
- Integrated bottom shelf and upturned edges — prevents items sliding off during transport or cleaning
- Scotch Brite finish — reduces visible fingerprints and minor surface scratches
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | THATS156 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 40.0 kg (88.2 lbs) |
Construction & Build Quality
Frame built from 201 AISI stainless steel square tube at 40×40 mm section. Work surface uses double-walled construction at 60 mm depth for rigidity. Undershelf and upturned edge detail are welded and ground flush.
- Scotch Brite brushed finish — hides minor wear, maintains appearance between deep cleans
- Adjustable feet at each leg — height range 850–900 mm accommodates operator preference
- Ships disassembled — reduces freight volume, assembly requires basic hand tools
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial furniture from UK stock to buyers in Europe, North America, Middle East, and Africa. CE, NSF, and CSA hygiene compliance documented on request. Lead time depends on configuration and destination port.
Frequently Asked Questions
Q: Is this table 304 or 430 grade stainless steel?
A: The THATS156 uses 201 AISI stainless steel. 201 grade offers good corrosion resistance in dry and low-moisture environments. For high-humidity or coastal locations, request 304 grade pricing.
Q: What is the actual load-bearing capacity?
A: Rated at 500 kg evenly distributed across the worktop. Concentrated loads (heavy mixers, single corner placement) should not exceed 150 kg per square foot to avoid permanent deflection.
Q: Are the legs or shelf height adjustable?
A: Leg height adjusts from 850 to 900 mm via threaded feet. Bottom shelf position is fixed during assembly. Custom shelf height available on request for orders above 10 units.
Q: Can a splashback be added to this model?
A: Splashbacks are not standard on the THATS156. Zodex manufactures bolt-on 150 mm or 300 mm rear risers for wall-mounted installations. Quote provided separately based on table length.
Q: Is custom sizing available for non-standard kitchen layouts?
A: Zodex produces custom widths from 800 mm to 2400 mm and depths from 600 mm to 800 mm. Minimum order quantity is 5 units for bespoke dimensions. Lead time extends by 3–4 weeks.