Stainless Steel Work Table Bottom Shelf 1800x600x900mm | TurcoBazaar ETW18060

Stainless Steel Work Table Bottom Shelf 1800x600x900mm | TurcoBazaar ETW18060
Stainless Steel Work Table Bottom Shelf 1800x600x900mm | TurcoBazaar ETW18060
This offer ends in:
Days
Hours
Min
Sec
from Save -58%
£186.00
£444.00
Ex Tax: £186.00
  • Brand: Zodex
  • Model: ETW18060
  • SKU: ETW18060
Sold: 0
Views: 1116
UK-Based Supplier
Worldwide Shipping
Technical Support
Spare Parts & After-Sales

The ETW18060 is a 1800×600×900mm stainless steel work table with galvanised undershelf. It provides hygienic workspace for food preparation in commercial kitchens, hotel prep areas, and catering production facilities. Assembly is required on site.

Commercial Application

This work table functions as a food-safe preparation surface in medium to high-volume commercial kitchens. The 1800mm length accommodates multiple prep tasks simultaneously. The undershelf provides storage for equipment, ingredients, or utensils at arm's reach.

Operators use the table during prep shifts for chopping, plating, and ingredient staging. The 600mm depth fits standard kitchen layout requirements without blocking traffic flow. Plastic bullet feet allow minor height adjustment on uneven floors.

Key Operational Advantages

  • 1.0mm 201 stainless steel top surface resists corrosion in wet environments
  • 1800×600mm surface area accommodates simultaneous multi-task prep operations
  • Galvanised undershelf and hat channel provide structural reinforcement
  • Plastic bullet feet enable levelling on uneven commercial kitchen floors
  • Flatpack delivery reduces freight cost for multi-unit orders
  • 25kg unit weight allows two-person assembly without lifting equipment

Technical Specifications

SpecificationDetails
Model / SKUETW18060
CertificationMeets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements.
Weight25.0 kg (55.1 lbs)

Construction & Build Quality

The work surface uses 1.0mm 201 stainless steel sheet. The frame consists of galvanised steel legs with socket joints. The undershelf is galvanised steel with hat channel bracing.

  • 1.0mm gauge 201 stainless steel top — food-contact grade
  • Galvanised steel frame and undershelf — corrosion-resistant
  • Socket-joint leg assembly — tool-free construction
  • Plastic bullet feet — floor protection and levelling

Suitable Operations

  • Commercial kitchens
  • Hotel prep areas
  • Restaurant kitchens
  • Catering production facilities
  • Food processing operations

Procurement & Support

TurcoBazaar supplies the ETW18060 from UK stock to commercial buyers worldwide. Shipping routes include UK mainland, Europe, USA, Canada, Middle East, and Africa. Multi-unit orders qualify for freight consolidation.

Worldwide ShippingUK, Europe, USA, Canada, Middle East, Africa
📦
Freight QuotationAvailable for larger or heavy units
💬
WhatsApp SupportTechnical guidance before ordering
🔧
Spare PartsAfter-sales support available
Need help choosing the correct model?Contact TurcoBazaar for technical specifications, assembly guidance, or freight quotation for multi-unit orders. WhatsApp available for rapid response.
Contact Our Team

Frequently Asked Questions

Q: What grade of stainless steel is the top surface?

A: The work surface is 1.0mm gauge 201 stainless steel. This grade is food-contact compliant and resists corrosion in commercial kitchen environments.

Q: What is the load-bearing capacity of the table?

A: Load capacity depends on weight distribution. Evenly distributed loads of up to 80kg are typical for this frame design. Concentrated point loads should not exceed 30kg.

Q: Are the legs adjustable for uneven floors?

A: The plastic bullet feet allow minor height adjustment of approximately ±10mm. This compensates for slight floor irregularities common in commercial kitchens.

Q: Can a splashback or upstand be added?

A: This model does not include a splashback. If required, contact TurcoBazaar to specify a custom configuration with rear or side upstands.

Q: Is custom sizing available for different kitchen layouts?

A: Custom dimensions can be ordered through TurcoBazaar. Lead time extends to 4–6 weeks for bespoke sizes.

Write a review

Note: HTML is not translated!
Rating
Bad Good

Important Information for Commercial Buyers

Worldwide Commercial Shipping

TurcoBazaar is a UK-based commercial kitchen equipment supplier serving the UK, Europe, the USA, Canada, and many international destinations. We regularly support restaurants, hotels, takeaways, food trucks, catering companies, cafés, and commercial kitchens with international equipment supply.

Professional Commercial Use

Our products are designed for professional foodservice and commercial kitchen environments. Depending on the model, equipment is suitable for restaurants, ghost kitchens, hotel kitchens, bakeries, takeaways, catering businesses, and mobile catering operations.

Gas and Electrical Options

Depending on the product, equipment may be available in LPG, Natural Gas, 110V, 220V, or 380V configurations. Available options can often be selected directly on the product page, or confirmed with our team before ordering.

Product Standards and Documentation

Many products are CE certified and manufactured for professional commercial use. For selected models, we may also be able to provide technical documentation to support local commercial checks where required.

After-Sales Support

TurcoBazaar provides professional after-sales support, technical guidance, and spare parts support for commercial customers worldwide. Our aim is to help businesses choose suitable equipment and keep it working reliably over the long term.

Need a Shipping Review?

If shipping costs appear high at checkout, contact our team directly. In many cases we can review the destination, product size, and freight options to see whether a more suitable shipping solution can be offered.