





Ask a Question About This Product
This offer ends in:
This work table provides a 1200×700 mm food-safe stainless steel surface for meal preparation, ingredient processing, and assembly tasks in commercial kitchens. The integrated bottom shelf adds 500 kg load capacity for storage of equipment or bulk ingredients. Height adjusts between 850–900 mm to match operator workflow requirements.
Commercial Application
Food service operations use this table for ingredient portioning, plating, dough handling, and assembly. The non-porous stainless surface meets hygiene protocols in UK, EU, USA, and Canadian food safety frameworks. The bottom shelf organizes mise en place containers and reduces workspace clutter during service.
The 700 mm depth fits standard kitchen layouts without blocking service lanes. Upturned edges contain spills during wet prep tasks. Operators adjust leg height to align with adjacent equipment or accommodate staff of varying stature.
Key Operational Advantages
- 201 AISI stainless steel construction with Scotch Brite finish for chemical resistance and cleanability
- Bottom shelf supports up to 500 kg distributed load for bulk storage or heavy equipment
- 40×40 mm square leg frame with adjustable feet compensates for uneven floors
- Double-walled worktop construction provides 60 mm reinforced surface
- Ships disassembled — 36 kg total weight simplifies freight handling
- CE certified for UK, EU, NSF (USA), and CSA (Canada) commercial kitchen compliance
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | THATS127 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 36.0 kg (79.4 lbs) |
Construction & Build Quality
The frame uses 201 AISI stainless steel throughout with square 40×40 mm legs and adjustable feet. The worktop is double-walled with 60 mm reinforcement and upturned edges. All surfaces receive Scotch Brite finish for abrasion resistance and simplified cleaning.
- 201 AISI stainless steel frame and shelving — suitable for wet and dry prep areas
- Double-walled worktop construction — 60 mm total thickness
- Square 40×40 mm leg profile with adjustable feet — compensates ±50 mm height variance
- Scotch Brite surface finish — reduces fingerprint visibility and simplifies degreasing
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies this Zodex work table from UK inventory to commercial buyers in the UK, Europe, USA, Canada, Middle East, and Africa. The unit ships disassembled to reduce freight volume. Standard delivery timelines apply for UK addresses; international orders receive freight quotation based on destination and quantity.
Frequently Asked Questions
Q: Is this table constructed from 304 or 430 grade stainless steel?
A: This model uses 201 AISI stainless steel, which provides corrosion resistance suitable for indoor commercial kitchens. It is not recommended for high-chloride environments such as coastal facilities or heavy chemical exposure. For marine or acidic conditions, specify 304 or 316 grade alternatives.
Q: What is the maximum load capacity for the worktop and bottom shelf?
A: The reinforced worktop supports distributed loads typical of meal prep tasks — cutting boards, mixers, and ingredient containers. The bottom shelf holds up to 500 kg distributed load. Concentrated point loads exceeding 100 kg should be avoided to prevent frame deformation.
Q: Are the legs adjustable, and can additional shelving be added?
A: The legs adjust between 850–900 mm via threaded feet to compensate for floor irregularities. This model ships with one fixed bottom shelf. Additional shelving is not factory-supported, but operators can fabricate custom inserts if clearance allows.
Q: Can a splash-back be installed on this table?
A: This table does not include mounting points for a factory splash-back. Operators can procure standalone splash-back panels and secure them to adjacent wall surfaces. Custom fabrication may allow retrofit mounting to the worktop edge.
Q: Is custom sizing available for non-standard kitchen layouts?
A: This model is manufactured at fixed 1200×700×900 mm dimensions. Custom sizing requires factory consultation and may extend lead time by 4–6 weeks. Contact TurcoBazaar with layout drawings for feasibility assessment and pricing.