Commercial Stainless Steel Work Table No Bottom shelf 1800x700x900mm | TurcoBazaar WT70180GNU

Commercial Stainless Steel Work Table No Bottom shelf 1800x700x900mm | TurcoBazaar WT70180GNU
Commercial Stainless Steel Work Table No Bottom shelf 1800x700x900mm | TurcoBazaar WT70180GNU
Commercial Stainless Steel Work Table No Bottom shelf 1800x700x900mm | TurcoBazaar WT70180GNU
Commercial Stainless Steel Work Table No Bottom shelf 1800x700x900mm | TurcoBazaar WT70180GNU
Commercial Stainless Steel Work Table No Bottom shelf 1800x700x900mm | TurcoBazaar WT70180GNU
This offer ends in:
Days
Hours
Min
Sec
from Save -66%
£134.40
£399.60
Ex Tax: £134.40
  • Brand: Zodex
  • Model: WT70180GNU
  • SKU: WT70180GNU
Sold: 0
Views: 1231
UK-Based Supplier
Worldwide Shipping
Technical Support
Spare Parts & After-Sales

The WT70180GNU is a flat-pack stainless steel work table measuring 1800×700×900mm with no under shelf. It provides a hygienic food-contact surface for commercial prep areas. Worktop rated to 250 kg load capacity.

Commercial Application

Open-frame design suits kitchens requiring frequent floor cleaning beneath work zones. Operators position equipment or storage crates in the space below. Facilitates compliance with commercial kitchen hygiene protocols requiring visible and accessible floor areas.

Used during prep service for plating, assembly, or ingredient staging. 1.8-metre length accommodates multiple station tasks simultaneously. Height set at standard 900mm for standing operator comfort during extended shift work.

Key Operational Advantages

  • 2mm stainless steel worktop with 250 kg load rating
  • No under shelf — unrestricted floor access for cleaning equipment
  • 1800×700mm footprint accommodates multi-operator workflow
  • Flat-pack delivery reduces freight cost on multi-unit orders
  • Adjustable plastic bullet feet compensate for uneven floor surfaces
  • CE-certified construction meets UK, EU, USA (NSF) and Canada (CSA) hygiene requirements

Technical Specifications

SpecificationDetails
Model / SKUWT70180GNU
CertificationMeets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements.
Weight24.0 kg (52.9 lbs)

Construction & Build Quality

Worktop fabricated from 2mm stainless steel 201 grade. Legs constructed from stainless steel with stainless steel socket joints. Adjustable plastic bullet feet provide levelling capability on uneven commercial kitchen floors.

  • 2mm stainless steel worktop — food-contact safe surface
  • Stainless steel legs and socket assembly — corrosion-resistant frame
  • Adjustable bullet feet — compensates for floor irregularities
  • Flat-pack assembly reduces shipping volume and cost

Suitable Operations

  • Commercial kitchens
  • Hotel prep areas
  • Restaurant kitchens
  • Catering production facilities
  • Food processing operations

Procurement & Support

TurcoBazaar supplies Zodex commercial furniture from UK warehouse to buyers in the United Kingdom, Europe, USA, Canada, Middle East and Africa. Multi-unit orders qualify for consolidated freight pricing. Lead time typically 1–3 working days for UK stock; longer for international shipments or volume orders.

Worldwide ShippingUK, Europe, USA, Canada, Middle East, Africa
📦
Freight QuotationAvailable for larger or heavy units
💬
WhatsApp SupportTechnical guidance before ordering
🔧
Spare PartsAfter-sales support available
Need help choosing the correct model?Contact TurcoBazaar for technical specification sheets or freight quotation on multi-unit orders. WhatsApp available for rapid response on assembly or installation queries.
Contact Our Team

Frequently Asked Questions

Q: What grade of stainless steel is the worktop?

A: The worktop is fabricated from 2mm 201-grade stainless steel. This grade provides adequate corrosion resistance for dry prep work and general commercial kitchen use. For marine or high-chloride environments, specify 304 grade at time of order.

Q: What is the maximum load-bearing capacity?

A: The worktop is rated to 250 kg evenly distributed load. Leg assembly and socket joints support this capacity when properly assembled. Point loads from heavy equipment require distribution pads to prevent surface deformation.

Q: Are the legs adjustable or fixed height?

A: Plastic bullet feet provide minor height adjustment to compensate for uneven floors. Total adjustment range approximately 10–15mm. Fixed leg length set at 900mm working height.

Q: Can a splashback or upstand be fitted?

A: This model ships without splashback. Aftermarket splashback panels can be retrofitted if worktop edge preparation allows bolt-on installation. Contact for compatible splashback part numbers if wall-mounted configuration required.

Q: Is custom sizing available for specific kitchen layouts?

A: Standard production dimensions are 1800×700×900mm. Custom sizing requires minimum order quantity and extended lead time. Submit dimensioned layout drawing for quotation on bespoke table fabrication.

Write a review

Note: HTML is not translated!
Rating
Bad Good

Important Information for Commercial Buyers

Worldwide Commercial Shipping

TurcoBazaar is a UK-based commercial kitchen equipment supplier serving the UK, Europe, the USA, Canada, and many international destinations. We regularly support restaurants, hotels, takeaways, food trucks, catering companies, cafés, and commercial kitchens with international equipment supply.

Professional Commercial Use

Our products are designed for professional foodservice and commercial kitchen environments. Depending on the model, equipment is suitable for restaurants, ghost kitchens, hotel kitchens, bakeries, takeaways, catering businesses, and mobile catering operations.

Gas and Electrical Options

Depending on the product, equipment may be available in LPG, Natural Gas, 110V, 220V, or 380V configurations. Available options can often be selected directly on the product page, or confirmed with our team before ordering.

Product Standards and Documentation

Many products are CE certified and manufactured for professional commercial use. For selected models, we may also be able to provide technical documentation to support local commercial checks where required.

After-Sales Support

TurcoBazaar provides professional after-sales support, technical guidance, and spare parts support for commercial customers worldwide. Our aim is to help businesses choose suitable equipment and keep it working reliably over the long term.

Need a Shipping Review?

If shipping costs appear high at checkout, contact our team directly. In many cases we can review the destination, product size, and freight options to see whether a more suitable shipping solution can be offered.