Commercial Stainless Steel Work Table No Bottom shelf 2100x700x900mm | TurcoBazaar WT70210GNU

Commercial Stainless Steel Work Table No Bottom shelf 2100x700x900mm | TurcoBazaar WT70210GNU
Commercial Stainless Steel Work Table No Bottom shelf 2100x700x900mm | TurcoBazaar WT70210GNU
Commercial Stainless Steel Work Table No Bottom shelf 2100x700x900mm | TurcoBazaar WT70210GNU
Commercial Stainless Steel Work Table No Bottom shelf 2100x700x900mm | TurcoBazaar WT70210GNU
Commercial Stainless Steel Work Table No Bottom shelf 2100x700x900mm | TurcoBazaar WT70210GNU
This offer ends in:
Days
Hours
Min
Sec
from Save -65%
£174.00
£490.80
Ex Tax: £174.00
  • Brand: Zodex
  • Model: WT70210GNU
  • SKU: WT70210GNU
Sold: 0
Views: 1132
UK-Based Supplier
Worldwide Shipping
Technical Support
Spare Parts & After-Sales

The WT70210GNU is a commercial-grade stainless steel work table measuring 2100×700×900mm with no undershelf. It provides a hygienic, non-porous workspace for food preparation in hotel kitchens, restaurants, and catering facilities. The open base design allows unobstructed access for large equipment or waste bins beneath the work surface.

Commercial Application

This table functions as a central prep station in high-volume commercial kitchens. The open frame eliminates the lower shelf, creating clearance for mixers, robot coupes, or waste receptacles during active service. Kitchen managers use this configuration when vertical equipment storage takes priority over horizontal storage capacity.

During service, the 2.1-metre surface accommodates multiple simultaneous prep tasks across several cooks. The 700mm depth provides sufficient working distance without obstructing walkways in narrow galley kitchens. Height of 900mm matches standard commercial counter ergonomics for standing work over extended shifts.

Key Operational Advantages

  • Top surface rated to 250kg distributed load capacity
  • 2mm stainless steel worktop resists corrosion in wet environments
  • Six-leg frame construction distributes weight evenly across floor surface
  • Adjustable bullet feet compensate for uneven floor levels up to 15mm
  • Open base design permits placement of 80-litre wheeled bins or floor-standing equipment
  • Flat-pack delivery reduces freight cost on international shipments

Technical Specifications

SpecificationDetails
Model / SKUWT70210GNU
CertificationMeets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements.
Weight30.0 kg (66.1 lbs)

Construction & Build Quality

The worktop uses 2mm grade 201 stainless steel with welded seams and rounded front edge. Frame construction combines stainless steel legs with galvanized steel socket joints. Plastic bullet feet provide height adjustment and floor protection across tile, concrete, or resin surfaces.

  • 2mm stainless steel top with polished finish
  • Galvanized steel leg frame resists moisture damage
  • Six-point support structure for stability under asymmetric loads
  • Adjustable feet compensate for drainage slopes in wet areas

Suitable Operations

  • Commercial kitchens
  • Hotel prep areas
  • Restaurant kitchens
  • Catering production facilities
  • Food processing operations

Procurement & Support

TurcoBazaar supplies Zodex commercial furniture from UK inventory to professional buyers worldwide. Standard delivery covers the United Kingdom, European Union, United States, Canada, Middle East territories, and Sub-Saharan Africa. Freight cost for this 30kg flat-pack unit averages £45–85 for UK mainland, with international quotations provided on request for consolidated shipments.

Worldwide ShippingUK, Europe, USA, Canada, Middle East, Africa
📦
Freight QuotationAvailable for larger or heavy units
💬
WhatsApp SupportTechnical guidance before ordering
🔧
Spare PartsAfter-sales support available
Need help choosing the correct model?Contact TurcoBazaar for technical specification sheets, load testing certificates, or freight quotation for multiple units. WhatsApp enquiries receive response within four working hours during UK business days.
Contact Our Team

Frequently Asked Questions

Q: What grade of stainless steel is used in the worktop?

A: The work surface uses 2mm grade 201 stainless steel. This specification provides adequate corrosion resistance for dry and moist food prep applications. Frame components use galvanized steel rather than stainless to reduce cost while maintaining structural integrity.

Q: What is the maximum load capacity for this table?

A: The top surface supports 250kg distributed load across the full 2100×700mm area. Concentrated point loads must not exceed 80kg in any 400×400mm section. Six-leg construction distributes weight evenly to prevent floor damage in installations over suspended or raised flooring.

Q: Are the legs height-adjustable?

A: Plastic bullet feet provide approximately 15mm of height adjustment per leg. This range compensates for drainage slopes or uneven floor surfaces common in commercial wet areas. Total table height remains fixed at 900mm to maintain ergonomic compatibility with standard commercial counter heights.

Q: Can a splash-back be added to this model?

A: This model ships without integral splash-back. Zodex manufactures compatible bolt-on upstands in 100mm and 150mm heights for installation against wall surfaces. Splash-backs must be ordered separately and require eight M6 bolts for secure attachment to the rear table edge.

Q: Is custom sizing available for non-standard kitchen layouts?

A: Zodex accepts custom dimension orders for tables between 1200mm and 2400mm length and 600mm to 800mm depth. Minimum order quantity for bespoke sizing is typically six units. Lead time extends to 8–12 weeks for non-standard fabrication with 30% deposit required at order confirmation.

Write a review

Note: HTML is not translated!
Rating
Bad Good

Important Information for Commercial Buyers

Worldwide Commercial Shipping

TurcoBazaar is a UK-based commercial kitchen equipment supplier serving the UK, Europe, the USA, Canada, and many international destinations. We regularly support restaurants, hotels, takeaways, food trucks, catering companies, cafés, and commercial kitchens with international equipment supply.

Professional Commercial Use

Our products are designed for professional foodservice and commercial kitchen environments. Depending on the model, equipment is suitable for restaurants, ghost kitchens, hotel kitchens, bakeries, takeaways, catering businesses, and mobile catering operations.

Gas and Electrical Options

Depending on the product, equipment may be available in LPG, Natural Gas, 110V, 220V, or 380V configurations. Available options can often be selected directly on the product page, or confirmed with our team before ordering.

Product Standards and Documentation

Many products are CE certified and manufactured for professional commercial use. For selected models, we may also be able to provide technical documentation to support local commercial checks where required.

After-Sales Support

TurcoBazaar provides professional after-sales support, technical guidance, and spare parts support for commercial customers worldwide. Our aim is to help businesses choose suitable equipment and keep it working reliably over the long term.

Need a Shipping Review?

If shipping costs appear high at checkout, contact our team directly. In many cases we can review the destination, product size, and freight options to see whether a more suitable shipping solution can be offered.