







Ask a Question About This Product
This offer ends in:
The WMTB70180 is a wall-mounted stainless steel work table measuring 1800×700×900mm. It provides a fixed preparation surface in commercial kitchens where floor space is limited. CE certified for food-contact compliance in UK, EU, USA and Canadian commercial operations.
Commercial Application
Wall-mounted tables free floor area while delivering food-safe workspace at standard working height. The integrated splashback protects wall surfaces during prep and wash-down. Kitchen managers install these units in narrow galley kitchens, prep corridors and against tiled walls where freestanding tables cannot fit.
The 1800mm length accommodates two operators working side by side during high-volume prep periods. The 700mm depth suits vegetable processing, portioning and assembly tasks without obstructing walkways. The raised splashback contains spills and simplifies end-of-shift cleaning.
Key Operational Advantages
- 1800×700mm work surface supports multi-operator prep workflows
- Wall-mounted design eliminates floor contact for easier cleaning
- Integrated splashback prevents wall contamination during use
- CE certified for food-contact compliance in UK, EU, North American operations
- Stainless steel construction meets commercial hygiene standards
- 900mm working height aligns with standard commercial kitchen ergonomics
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | WMTB70180 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
Construction & Build Quality
Built from food-grade stainless steel with welded seams and a raised rear splashback. The table surface is non-porous and resistant to staining from acids, oils and cleaning chemicals. Wall brackets distribute load evenly across mounting points.
- Food-grade stainless steel top and splashback
- Welded seams prevent moisture ingress
- Reinforced wall brackets for secure mounting
- Non-porous surface suitable for direct food contact
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial furniture to buyers in the UK, Europe, USA, Canada, Middle East and Africa. All units ship with mounting hardware and installation guidance. Lead time is typically 1–3 working days for UK delivery.
Frequently Asked Questions
Q: What grade of stainless steel is used in the WMTB70180?
A: The table is constructed from food-grade stainless steel suitable for direct food contact. Zodex typically uses 430-grade stainless for non-corrosive environments or 304-grade where chloride exposure is higher. Contact TurcoBazaar to confirm grade specification for your delivery.
Q: What is the maximum load capacity of this wall-mounted table?
A: Load capacity depends on wall construction and bracket installation. Typical capacity on masonry or stud walls with correct fixings is 100–150 kg evenly distributed. Installation must comply with local building codes.
Q: Can the table height be adjusted after installation?
A: No. The 900mm height is fixed at installation. Wall brackets are mounted at predetermined positions to achieve the stated working height.
Q: Does the splashback come pre-attached or require assembly?
A: The splashback is welded to the rear edge of the work surface and ships as a single unit. No on-site assembly is required for the splashback.
Q: Is custom sizing available for different kitchen layouts?
A: Zodex manufactures wall-mounted tables in multiple standard sizes. Custom dimensions may be available on request for larger orders. Contact TurcoBazaar with specific width, depth and height requirements for quotation.