



Ask a Question About This Product
This offer ends in:
The FW6 is a freestanding electrical warmer station measuring 600×700×1560mm. It holds pre-cooked chips and fried foods at serving temperature under overhead heat lamps. Operators in takeaway shops, mobile catering units, and quick-service restaurants use it during peak service periods.
Commercial Application
This unit addresses the operational need to hold fried products at safe serving temperature without further cooking. The overhead lamp array maintains heat across multiple product types simultaneously. Storage cabinet below provides immediate access to serving utensils and portion containers during service rush.
Used during continuous service windows when product turnover is high. The 1500W heating capacity sustains temperature for portions cycled every 10–15 minutes. Compartmented layout allows separation of chips from battered products to prevent cross-contact of textures.
Key Operational Advantages
- Overhead infrared lamps deliver 1500W across warming compartments without direct product contact
- Stainless steel construction facilitates wet-wipe sanitation between service periods
- Freestanding 66kg unit requires no fixed installation or ventilation hood integration
- Lower storage cabinet reduces operator movement to ancillary storage during service
- 600mm depth fits alongside standard fryer footprints in compact service lines
- Single-phase 220V connection eliminates three-phase power requirement
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | FW6 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 66.0 kg (145.5 lbs) |
Construction & Build Quality
Body fabricated from commercial-grade stainless steel with welded corner joints. Heating elements mounted in overhead assembly with replaceable lamp units. Lower cabinet fitted with hinged door and internal shelf.
- Stainless steel body and worktop surface resist corrosion from salt and grease exposure
- 66kg unit weight provides operational stability without floor anchoring
- Overhead lamp housing protects heating elements from product splash
- Lower cabinet door uses commercial hinges rated for repeated access cycles
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial warming equipment from UK warehouse to buyers in Europe, North America, Middle East, and Africa. This 66kg unit ships via pallet freight with advance transit documentation. Voltage compatibility must be confirmed before dispatch to non-220V regions.
Frequently Asked Questions
Q: What grade of stainless steel is used in the FW6 body construction?
A: The FW6 uses commercial kitchen-grade stainless steel for external panels and worktop surfaces. Grade specification available on request for compliance documentation. Interior cabinet shelving uses stainless steel or food-grade coated material.
Q: What is the maximum load capacity per warming compartment?
A: Each compartment holds approximately 3–4kg of fried product distributed across the base area. Overloading reduces heat circulation and extends temperature recovery time. Total product load across all compartments should not exceed 15kg.
Q: Are the legs height-adjustable for uneven flooring?
A: The FW6 is a fixed-height freestanding unit at 1560mm overall height. Levelling feet are not specified in standard configuration. Custom height adjustment requires consultation at time of order.
Q: Can a rear splash-back be fitted to the unit?
A: No integral splash-back is included in the FW6 standard build. Wall-mounted splash protection must be installed separately if required by site conditions. Unit can be positioned against tiled or stainless-clad walls.
Q: Is the FW6 available in custom widths or depths?
A: The 600×700mm footprint is standard production size from Zodex. Custom dimensions require factory quotation with extended lead time. Minimum order quantities may apply for non-standard builds.