Professional Heated Cupboard Stainless steel Sliding doors Rear upstand Width 1000mm Depth 700mm | TurcoBazaar THWSR107A

Professional Heated Cupboard Stainless steel Sliding doors Rear upstand Width 1000mm Depth 700mm | TurcoBazaar THWSR107A
Professional Heated Cupboard Stainless steel Sliding doors Rear upstand Width 1000mm Depth 700mm | TurcoBazaar THWSR107A
This offer ends in:
Days
Hours
Min
Sec
from Save -65%
£493.20
£1,401.60
Ex Tax: £493.20
  • Brand: Zodex
  • Model: THWSR107A
  • SKU: THWSR107A
Sold: 0
Views: 886
UK-Based Supplier
Worldwide Shipping
Technical Support
Spare Parts & After-Sales

The THWSR107A heated cupboard holds pre-plated meals or stacks of service plates at controlled temperatures between +30°C and +90°C. It uses a heating fan to maintain consistent warmth across a 1000mm × 700mm stainless steel working surface. Operators in hotel banqueting, large canteens, and catering production facilities use it to stage service-ready plates during peak periods.

Commercial Application

This unit sits in the pass or plating line where chefs need heated storage between meal assembly and service dispatch. Sliding doors reduce aisle obstruction in narrow kitchens. The rear upstand prevents wall splash contact and protects wiring during cleaning.

During banquet service or buffet prep, operators pre-load warm plates so front-of-house staff collect without wait time. Temperature control prevents bacterial growth while keeping china at serving temperature. A 1000mm width accommodates six 250mm dinner plates side by side or three gastronorm 1/1 containers.

Key Operational Advantages

  • Temperature range +30 to +90°C controlled by heating fan and thermostat
  • Sliding door mechanism reduces space requirement in tight pass areas
  • Stainless steel construction across all food contact and external surfaces
  • Reinforced top surface supports additional equipment or stack loading during prep
  • Adjustable feet compensate for uneven floor gradients in older kitchens
  • Ships fully assembled — no on-site build time required

Technical Specifications

SpecificationDetails
Model / SKUTHWSR107A
CertificationMeets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements.
Weight69.0 kg (152.1 lbs)

Construction & Build Quality

All surfaces are 304-grade stainless steel with welded seams and rounded internal corners for spray-down cleaning. The heating fan circulates air through internal ducting to eliminate cold spots. Adjustable stainless feet provide 50mm height variation for levelling and underfloor cleaning access.

  • 304 stainless steel body and working surface
  • Welded construction with rounded internal corners
  • Heating fan with ducted air circulation
  • Rear upstand integral to body frame

Suitable Operations

  • Commercial kitchens
  • Hotel prep areas
  • Restaurant kitchens
  • Catering production facilities
  • Food processing operations

Procurement & Support

TurcoBazaar supplies the THWSR107A from UK stock to commercial buyers in Europe, North America, the Middle East, and Africa. This Zodex-manufactured unit ships fully assembled at 69 kg. Freight consolidation is available for multi-unit orders or when combining with other hot holding equipment.

Worldwide ShippingUK, Europe, USA, Canada, Middle East, Africa
📦
Freight QuotationAvailable for larger or heavy units
💬
WhatsApp SupportTechnical guidance before ordering
🔧
Spare PartsAfter-sales support available
Need help choosing the correct model?Contact TurcoBazaar for temperature verification protocols, custom upstand sizing, or freight quotation on multi-unit orders. Technical guidance available via WhatsApp or direct line for installation planning.
Contact Our Team

Frequently Asked Questions

Q: What grade of stainless steel is used in the THWSR107A construction?

A: Body and working surface are 304-grade stainless steel. Internal shelving and door frames use the same grade for consistent corrosion resistance. All food contact zones meet CE and NSF material requirements.

Q: What is the maximum load capacity for the top working surface?

A: The reinforced top surface supports up to 80 kg of distributed load. This accommodates stacked service plates, plated meals in gastronorm pans, or auxiliary equipment during prep. Concentrated point loads should not exceed 30 kg per 100mm² contact area.

Q: Can the internal shelf height be adjusted for different plate sizes?

A: The standard model ships with fixed internal shelf positioning. Custom shelf spacing is available as a factory modification for orders of three units or more. Adjustable shelf brackets add 2–3 weeks to lead time.

Q: Is a taller rear upstand available for wall-mounted installations?

A: The standard unit includes a 150mm rear upstand. Extended 300mm upstands are available by special order. Specify upstand height requirements at time of purchase to avoid retrofit delays.

Q: What is the expected temperature recovery time after door opening?

A: At 90°C set point, the unit returns to within 5°C of target temperature in approximately 3 minutes after a 30-second door opening. Recovery time extends slightly at lower ambient temperatures or during rapid sequential access.

Write a review

Note: HTML is not translated!
Rating
Bad Good

Important Information for Commercial Buyers

Worldwide Commercial Shipping

TurcoBazaar is a UK-based commercial kitchen equipment supplier serving the UK, Europe, the USA, Canada, and many international destinations. We regularly support restaurants, hotels, takeaways, food trucks, catering companies, cafés, and commercial kitchens with international equipment supply.

Professional Commercial Use

Our products are designed for professional foodservice and commercial kitchen environments. Depending on the model, equipment is suitable for restaurants, ghost kitchens, hotel kitchens, bakeries, takeaways, catering businesses, and mobile catering operations.

Gas and Electrical Options

Depending on the product, equipment may be available in LPG, Natural Gas, 110V, 220V, or 380V configurations. Available options can often be selected directly on the product page, or confirmed with our team before ordering.

Product Standards and Documentation

Many products are CE certified and manufactured for professional commercial use. For selected models, we may also be able to provide technical documentation to support local commercial checks where required.

After-Sales Support

TurcoBazaar provides professional after-sales support, technical guidance, and spare parts support for commercial customers worldwide. Our aim is to help businesses choose suitable equipment and keep it working reliably over the long term.

Need a Shipping Review?

If shipping costs appear high at checkout, contact our team directly. In many cases we can review the destination, product size, and freight options to see whether a more suitable shipping solution can be offered.