Commercial Pot Wash Sink Stainless steel 1 bowl Splashback 1370x600x1110mm Round legs | TurcoBazaar C1T18181218LR

Commercial Pot Wash Sink Stainless steel 1 bowl Splashback 1370x600x1110mm Round legs | TurcoBazaar C1T18181218LR
Commercial Pot Wash Sink Stainless steel 1 bowl Splashback 1370x600x1110mm Round legs | TurcoBazaar C1T18181218LR
This offer ends in:
Days
Hours
Min
Sec
from Save -67%
£238.80
£729.60
Ex Tax: £238.80
  • Brand: Zodex
  • Model: C1T18181218LR
  • SKU: C1T18181218LR
Sold: 0
Views: 1039
UK-Based Supplier
Worldwide Shipping
Technical Support
Spare Parts & After-Sales

The C1T18181218LR is a single-bowl stainless steel pot wash sink measuring 1370x600x1110mm with integral splashback and round legs. It handles large cookware, roasting trays, and mixing bowls in commercial kitchens, hotel prep areas, and catering facilities. The unit ships flat-packed with plastic bullet feet and drains via 89mm outlet.

Commercial Application

Pot wash sinks are installed in dedicated wash-up zones separate from food prep. They allow staff to manually clean large-format cookware that does not fit through standard dishwashers. The 460x460x305mm bowl depth accommodates commercial roasting pans and stock pots.

During service breakdown, kitchen porters use the sink for heavy soil removal before mechanical washing. The rear splashback prevents water spray onto adjacent walls. Left and right drainboards provide staging space for washed items before drying racks.

Key Operational Advantages

  • Single 460x460x305mm bowl with 305mm depth for large cookware
  • 1370mm overall width includes left and right drainboard surfaces
  • Rear splashback panel protects walls during manual washing
  • 89mm drain outlet and 32mm faucet hole pre-drilled
  • Plastic bullet feet allow minor levelling on uneven floors
  • Ships flat-packed for reduced freight cost on international orders

Technical Specifications

SpecificationDetails
Model / SKUC1T18181218LR
CertificationMeets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements.

Construction & Build Quality

The unit is fabricated from stainless steel with welded bowl construction. Drainboards are pressed from single sheets to eliminate seams. Round legs provide structural support with ABS plastic feet for floor contact.

  • Stainless steel body and bowl with welded joints
  • Single-piece pressed drainboards without seams
  • Round tubular legs with ABS bullet feet
  • Pre-drilled 89mm drain and 32mm tap holes

Suitable Operations

  • Commercial kitchens
  • Hotel prep areas
  • Restaurant kitchens
  • Catering production facilities
  • Food processing operations

Procurement & Support

TurcoBazaar supplies this Zodex-manufactured pot wash sink from UK inventory to buyers in Europe, North America, the Middle East, and Africa. The unit meets CE hygiene and safety standards applicable in UK and EU operations, with equivalence to NSF and CSA requirements for USA and Canadian installations. Flat-pack shipping reduces international freight costs.

Worldwide ShippingUK, Europe, USA, Canada, Middle East, Africa
📦
Freight QuotationAvailable for larger or heavy units
💬
WhatsApp SupportTechnical guidance before ordering
🔧
Spare PartsAfter-sales support available
Need help choosing the correct model?Contact TurcoBazaar for technical specifications, assembly diagrams, or freight quotations on multiple units. WhatsApp enquiries receive same-day response during UK business hours.
Contact Our Team

Frequently Asked Questions

Q: What grade of stainless steel is used in the C1T18181218LR construction?

A: The manufacturer specifies stainless steel construction meeting commercial kitchen hygiene standards. Zodex typically uses 430-grade stainless for sinks in this price category. Contact TurcoBazaar for material certification if 304-grade is required for specific health authority compliance.

Q: What is the maximum load capacity for the drainboards?

A: The pressed drainboards support typical stacked cookware loads during manual washing operations. Zodex does not publish a specific weight rating, but the construction is suitable for standard commercial pot wash use. Avoid concentrated point loads from extremely heavy items.

Q: Are the legs height-adjustable or fixed?

A: The round legs are fixed-length tubular steel with plastic bullet feet. The feet provide minor levelling adjustment of approximately 10-15mm by rotating on threaded studs. For larger height changes, shims or custom leg fabrication is required.

Q: Can the splashback be removed if wall-mounting is preferred?

A: The splashback is welded to the main body as an integral component. It cannot be removed without cutting. If wall-mounting without rear panel is required, consider ordering a model without splashback or specifying custom fabrication.

Q: Is custom sizing available for tighter kitchen layouts?

A: Zodex manufactures this model in the listed 1370mm width as standard inventory. Custom sizing requires minimum order quantities and extended lead times of 6-8 weeks. Contact TurcoBazaar with dimensional requirements for feasibility assessment and quotation.

Write a review

Note: HTML is not translated!
Rating
Bad Good

Important Information for Commercial Buyers

Worldwide Commercial Shipping

TurcoBazaar is a UK-based commercial kitchen equipment supplier serving the UK, Europe, the USA, Canada, and many international destinations. We regularly support restaurants, hotels, takeaways, food trucks, catering companies, cafés, and commercial kitchens with international equipment supply.

Professional Commercial Use

Our products are designed for professional foodservice and commercial kitchen environments. Depending on the model, equipment is suitable for restaurants, ghost kitchens, hotel kitchens, bakeries, takeaways, catering businesses, and mobile catering operations.

Gas and Electrical Options

Depending on the product, equipment may be available in LPG, Natural Gas, 110V, 220V, or 380V configurations. Available options can often be selected directly on the product page, or confirmed with our team before ordering.

Product Standards and Documentation

Many products are CE certified and manufactured for professional commercial use. For selected models, we may also be able to provide technical documentation to support local commercial checks where required.

After-Sales Support

TurcoBazaar provides professional after-sales support, technical guidance, and spare parts support for commercial customers worldwide. Our aim is to help businesses choose suitable equipment and keep it working reliably over the long term.

Need a Shipping Review?

If shipping costs appear high at checkout, contact our team directly. In many cases we can review the destination, product size, and freight options to see whether a more suitable shipping solution can be offered.