Ask a Question About This Product
- Model: 331001
- SKU: 331001
This wall-mounted stainless steel shelf measures 600mm wide by 300mm deep. The tubular bracket design folds flat against the wall when not required. Installed in commercial kitchens, prep areas, and catering facilities where space utilisation and hygiene compliance are operational priorities.
Commercial Application
Kitchen managers install folding shelves where floor area is limited but additional working surface or temporary storage is required during peak service periods. The unit mounts to vertical surfaces at variable heights to suit workflow requirements. When folded, the shelf leaves the wall area clear for cleaning and equipment access.
During service, the shelf deploys to hold trays, ingredient containers, or portioned dishes awaiting plating. The open tubular construction allows drainage and air circulation around stored items. The stainless steel surface withstands spray-down cleaning protocols required in food contact environments.
Key Operational Advantages
- 600mm width suits standard commercial tray dimensions and ingredient container footprints
- 300mm depth provides working surface without obstructing operator movement in narrow prep zones
- Tubular stainless steel frame clears debris and simplifies daily cleaning routines
- Folding mechanism reduces protrusion when shelf is not in active use
- Two-bracket mounting distributes load across fixings for stable operation under repeated deployment
- CE certification confirms compliance with UK and EU commercial kitchen hygiene standards
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | 331001 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
Construction & Build Quality
The frame uses tubular stainless steel sections welded at junction points. Surface finish is smooth to prevent bacterial harbourage. Folding brackets incorporate steel pivot points that tolerate repeated deployment cycles without play or loosening.
- Stainless steel throughout for corrosion resistance in wet cleaning environments
- Tubular frame design sheds water and prevents pooling on horizontal surfaces
- Smooth finish meets food contact hygiene requirements for commercial preparation areas
- Two-point wall mounting provides fixing redundancy and load distribution
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies this folding shelf from UK inventory to commercial operators in the UK, Europe, USA, Canada, Middle East, and Africa. Bulk orders for hotel refits or multi-site restaurant chains ship consolidated for freight efficiency. Lead times and delivery routing are confirmed at quotation stage.
Frequently Asked Questions
Q: What grade of stainless steel is used in the frame construction?
A: The unit uses food-grade stainless steel suitable for commercial kitchen environments. Specific alloy designation (304 or 430 series) is confirmed at order placement based on regional compliance requirements and customer specification.
Q: What is the maximum load capacity of the shelf when deployed?
A: Load capacity depends on wall substrate strength and fixing method. The tubular frame tolerates typical kitchen utensil and ingredient container loads when mounted to solid masonry or steel stud with appropriate fixings. Contact TurcoBazaar with substrate details for load rating guidance.
Q: Can the shelf height be adjusted after installation?
A: Mounting height is set during installation by bracket placement on the wall. The shelf does not include vertical adjustment once fixed. Plan mounting height based on operator reach requirements and clearance below for equipment or work surfaces.
Q: Does the unit include a splash-back or rear guard?
A: This model is an open shelf without rear splash protection. It mounts to existing tiled or stainless steel wall surfaces that provide the required splash barrier for food preparation compliance.
Q: Are custom widths available for specific kitchen layouts?
A: This shelf is supplied in the standard 600mm width. For non-standard dimensions or bespoke mounting configurations, contact TurcoBazaar technical team with layout drawings and dimensional requirements for feasibility assessment.