



Ask a Question About This Product
This offer ends in:
- Model: GS65VWALNUTSEATWALNUTBACK
- SKU: GS65VWALNUTSEATWALNUTBACK
This steel-framed dining chair seats guests in commercial hospitality operations. The powder-coated black frame supports an antique walnut seat and back. Weight capacity and finish treatment align with daily front-of-house use in restaurants, pubs, and hotel dining areas.
Commercial Application
High-turnover restaurants and hotel breakfast rooms require seating that withstands repeated daily use. Steel frames resist impact and wear from constant movement. Replaceable wooden seat and back components extend operational life without replacing the entire unit.
Front-of-house managers specify chairs based on seating density and floor layout. At 440 mm width and 485 mm depth, this model fits standard table spacing. Seat height of 495 mm matches typical dining table heights of 720–760 mm.
Key Operational Advantages
- Powder-coated steel frame resists chipping and corrosion in high-humidity dining environments
- Antique walnut seat and back attach via accessible hardware for component-level replacement
- Unit weight of 3.5 kg allows single-person handling during floor resets and cleaning rotations
- 830 mm total height accommodates adult users while maintaining stackable profile for storage
- CE-certified construction meets UK and EU commercial furniture safety standards
- Black frame finish integrates with existing commercial interior schemes without repainting
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | GS65VWALNUTSEATWALNUTBACK |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 3.5 kg (7.7 lbs) |
Construction & Build Quality
Frame construction uses powder-coated steel with welded joints at stress points. Seat and back components are kiln-dried hardwood with antique walnut stain and protective lacquer. Mounting hardware is zinc-plated steel with recessed fixtures.
- Welded steel frame joints eliminate bolt loosening under repeated load cycles
- Kiln-dried hardwood seat and back resist warping in variable humidity conditions
- Powder-coat finish applied at 180 microns minimum thickness for abrasion resistance
- Replaceable glide feet protect flooring and allow height micro-adjustment on uneven surfaces
Suitable Operations
- Nut processing farms
- Confectionery ingredient workshops
- Artisanal food producers
- Specialty bakeries
- Commercial food prep kitchens
Procurement & Support
TurcoBazaar supplies Turkish-manufactured commercial furniture to buyers in the UK, Europe, USA, Canada, Middle East, and Africa. Shipping arrangements scale from single-unit courier delivery to container freight for volume orders. Lead time is typically 1–3 working days for stock items held at UK distribution.
Frequently Asked Questions
Q: What is the weight capacity per chair under continuous commercial use?
A: The steel frame supports 120 kg static load under CE testing protocols. Continuous daily use in commercial settings assumes average guest weight of 80–90 kg with safety margin. Frame integrity remains stable through minimum 50,000 sit-stand cycles per EN 16139 standards.
Q: How do replacement seat and back components attach to the frame?
A: Four recessed bolts secure the seat to the frame using M6 thread hardware accessible from underneath. The back attaches via two upper bolts and two lower frame hooks. Standard 4 mm hex key removes and replaces components in under five minutes per chair.
Q: Can these chairs stack for storage between service periods?
A: The contoured back design allows vertical stacking up to six units high without frame contact. Stack height of six chairs reaches approximately 1.8 m for transport cart compatibility. Stacking reduces floor space requirement by 75% during cleaning rotations or event changeovers.
Q: What cleaning protocols maintain the powder-coat finish and wood components?
A: Powder-coated steel requires damp cloth with neutral pH cleaner; avoid abrasive pads that scratch finish. Wood seat and back wipe clean with diluted detergent; reseal annually with furniture wax or lacquer as stain wear appears. Do not pressure-wash or submerge; moisture infiltration degrades wood-to-frame bond.
Q: Are bulk orders available with custom wood stain or frame colours?
A: Minimum order quantity of 100 units allows custom powder-coat colours from RAL palette with 4–6 week lead time. Wood seat and back accept custom stain matching with sample approval before production run. Custom orders require 30% deposit and non-returnable component specification.