Commercial 8" Deck Mount Mixing Faucet with 10" Swing Nozzle Chrome Plated Brass | TurcoBazaar GD3614

Commercial 8" Deck Mount Mixing Faucet with 10" Swing Nozzle Chrome Plated Brass | TurcoBazaar GD3614
Commercial 8" Deck Mount Mixing Faucet with 10" Swing Nozzle Chrome Plated Brass | TurcoBazaar GD3614
Commercial 8" Deck Mount Mixing Faucet with 10" Swing Nozzle Chrome Plated Brass | TurcoBazaar GD3614
Commercial 8" Deck Mount Mixing Faucet with 10" Swing Nozzle Chrome Plated Brass | TurcoBazaar GD3614
Commercial 8" Deck Mount Mixing Faucet with 10" Swing Nozzle Chrome Plated Brass | TurcoBazaar GD3614
This offer ends in:
Days
Hours
Min
Sec
from Save -60%
£86.40
£216.00
Ex Tax: £86.40
  • Brand: Zodex
  • Model: GD3614
  • SKU: GD3614
Sold: 0
Views: 104
UK-Based Supplier
Worldwide Shipping
Technical Support
Spare Parts & After-Sales

The GD3614 is an 8-inch deck mount mixing faucet with a 10-inch swing nozzle, built for commercial wash stations and prep areas. Chrome-plated brass construction handles repeated daily use in restaurants, hotel kitchens, and catering operations. Compression cartridges control hot and cold water flow with dual lever operation.

Commercial Application

Mounts to standard dual-hole sink decks in warewash zones, prep stations, and hand hygiene areas. The 10-inch swing nozzle provides clearance for large pots and washing operations. Two 22mm mounting holes spaced at 8 inches fit most commercial sink configurations.

Used throughout service for hand washing, utensil rinsing, and pot filling. The swing nozzle rotates to direct water flow where needed. Compression cartridges allow staff to adjust temperature and volume without tool-based maintenance.

Key Operational Advantages

  • Chrome-plated brass body resists corrosion in wet commercial environments
  • 10-inch swing nozzle allows positioning for multiple sink compartments
  • Dual compression cartridges separate hot and cold water control
  • 8-inch mounting span matches standard commercial sink deck spacing
  • 2.0 kg weight supports stable installation on stainless steel surfaces
  • CE certified for commercial kitchen hygiene and safety standards

Technical Specifications

SpecificationDetails
Model / SKUGD3614
CertificationMeets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements.
Weight2.0 kg (4.4 lbs)

Construction & Build Quality

Body machined from brass and finished with polished chrome plating. Compression-type cartridges operate hot and cold water independently. The swing nozzle rotates on a brass swivel joint.

  • Chrome-plated brass body and nozzle
  • Compression cartridges for durable valve operation
  • Dual lever handles mounted on 8-inch centres
  • 22mm mounting holes for standard deck installation

Suitable Operations

  • Restaurants
  • Hotels
  • Catering businesses
  • Food trucks
  • Commercial kitchens

Procurement & Support

TurcoBazaar supplies this unit from UK stock to buyers in Europe, North America, the Middle East, and Africa. Zodex manufactures the GD3614 in Turkey. Units ship via standard freight for small quantities or consolidated pallets for multi-item orders.

Worldwide ShippingUK, Europe, USA, Canada, Middle East, Africa
📦
Freight QuotationAvailable for larger or heavy units
💬
WhatsApp SupportTechnical guidance before ordering
🔧
Spare PartsAfter-sales support available
Need help choosing the correct model?Contact TurcoBazaar for technical specifications, mounting requirements, or freight quotation for multiple units. WhatsApp available for installation questions.
Contact Our Team

Frequently Asked Questions

Q: Does this faucet meet commercial kitchen plumbing codes?

A: The GD3614 is CE certified and meets hygiene standards applicable to UK, EU, USA (NSF), and Canada (CSA) commercial installations. Verify local plumbing codes for specific pressure and backflow requirements.

Q: What sink deck configuration does this require?

A: Two 22mm holes spaced 8 inches (203mm) centre-to-centre. Standard on most commercial three-compartment sinks and prep station decks.

Q: Can TurcoBazaar ship this to North America or the Middle East?

A: Yes. TurcoBazaar ships worldwide including USA, Canada, UAE, Saudi Arabia, and across Europe and Africa. Freight cost depends on destination and order size.

Q: Are replacement cartridges available if a valve fails?

A: Compression cartridges and mounting hardware are stocked as spare parts. Contact TurcoBazaar with model number GD3614 for replacement components.

Q: What water pressure range does this faucet operate under?

A: Standard commercial kitchen pressures (typically 2–5 bar / 30–70 psi). Consult TurcoBazaar technical support for specific installation pressure requirements or pressure regulator recommendations.

Write a review

Note: HTML is not translated!
Rating
Bad Good

Important Information for Commercial Buyers

Worldwide Commercial Shipping

TurcoBazaar is a UK-based commercial kitchen equipment supplier serving the UK, Europe, the USA, Canada, and many international destinations. We regularly support restaurants, hotels, takeaways, food trucks, catering companies, cafés, and commercial kitchens with international equipment supply.

Professional Commercial Use

Our products are designed for professional foodservice and commercial kitchen environments. Depending on the model, equipment is suitable for restaurants, ghost kitchens, hotel kitchens, bakeries, takeaways, catering businesses, and mobile catering operations.

Gas and Electrical Options

Depending on the product, equipment may be available in LPG, Natural Gas, 110V, 220V, or 380V configurations. Available options can often be selected directly on the product page, or confirmed with our team before ordering.

Product Standards and Documentation

Many products are CE certified and manufactured for professional commercial use. For selected models, we may also be able to provide technical documentation to support local commercial checks where required.

After-Sales Support

TurcoBazaar provides professional after-sales support, technical guidance, and spare parts support for commercial customers worldwide. Our aim is to help businesses choose suitable equipment and keep it working reliably over the long term.

Need a Shipping Review?

If shipping costs appear high at checkout, contact our team directly. In many cases we can review the destination, product size, and freight options to see whether a more suitable shipping solution can be offered.